Artículo

Osmotic Dehydration of Nectarines: Influence of the Operating Conditions and Determination of the Effective Diffusion Coefficients

Rodriguez, Maria Marcela Icon; Arballo, Javier Ramiro Icon; Campañone, Laura Analia Icon; Cocconi, Miriam Beatriz ; Pagano, A. M. ; Mascheroni, Rodolfo Horacio Icon

Otros responsables

Fecha

10/2013

Editorial

Springer

Revista

Food and Bioprocess Technology

Título del libro

Nombre del evento

Fecha del evento

Institución organizadora

ISSN

1935-5130

eISSN

ISBN

Idioma

Inglés

Tipo del evento

Clasificación temática

Resumen

The aim of the present work is to study the kinetics of osmotic dehydration of Caldesi nectarines (Prunus persica var. nectarina) evaluating the effect of osmotic solution concentration, type of solute, temperature, fruit/solute ratio and process time on moisture content, water loss, soluble solids content and solids gain. The process analysis was carried out experimentally and numerically through the mathematical modelling of mass transfer. Hypertonic solutions of glucose syrup and sorbitol (40 and 60 % w/w) were used for dehydration, during 2 h of process at temperatures of 25 and 40 °C, with fruit/osmotic agent ratio of 1:4 and 1:10. Water loss and solids gain showed significant differences depending on the type and concentration of the osmotic agent, process time and fruit/solution ratio. The concentration interacted significantly with all variables; in addition, there was an interaction between the type of osmotic agent and the relationship between fruit and the osmotic agent. The effective diffusion coefficients were obtained from the analytical solution of Fick's second law applied to flat-plate geometry and by solving the mass transfer microscopic balances by finite element method, taking into account the real geometry of the nectarine pieces. The values obtained from Fick's law varied between 1.27 × 10-10 and 1.37 × 10-08 m2 s-1 for water and from 1.14 × 10-10 to 1.08 × 10-08 m2 s-1 for soluble solids, while the values calculated by finite elements method ranges were between 0.70 × 10-09 and 4.80 × 10-09 m2 s-1 for water and between 0.26 × 10-09 and 1.70 × 10-09 m2 s-1 for soluble solids. The diffusion coefficients values obtained from the numerical solution are consistent with those published in literature.

Aprobación

Revisión

Complementado por

Referenciado por

Licencia Creative Commons

Excepto donde se indique lo contrario, la licencia de este ítem se describe como by-nc-sa