Ceramic bricks using pistachio shells as controlled porosity former

Abstract

The present work studies the use of pistachio shells as aporosity-forming raw material in the manufacture of ceramic bricks. It focuses on the characteristics ofthe ceramic pieces obtained with different residual biomass contents (from 5 to 20% by volume). The specimens were shaped by uniaxial pressure of 25 MPa, and then were treated at 950°C for 3h. Based onthe results obtained it is possible to conclude that the use of this residual biomass,as a pore former in the ceramic industry is feasible. The proportion of added biomass that generates the best characteristics and propertiesin the final product is 10%. Up tothis percentage of aggregate, ceramic pieces with very good macroscopic and microscopic characteristics are obtained, with porosity and flexural strength values that meet market requirementsfor this type of product. Optical microscopy technique has been used to carry out a detailed analysis of the shape and size of the formed pores, which is a specific objective of this work. It has been observed that for contentsof 5 and 10% biomass, the shape of pores is similar to the shape of the particles of added pistachio shells, while for higher contents(15 and 20%)it is different with elongated characteristics. In relation with the size of the pores, at lower contents is around 60% of the originalparticles size, and for the higher percentages of biomass, they are larger, indicating that agglomerates of particles are formed and when combusted, produce that porosity characteristics.