Diagnóstico del comportamiento térmico de edificios en forma masiva mediante el uso de la termografía infrarroja
; Barea Paci, Gustavo Javier 
Otros responsables
Fecha
11/2018
Editorial
Universidad de Buenos Aires. Facultad de Arquitectura, Diseño y Urbanismo
Revista
Área
Título del libro
Nombre del evento
Fecha del evento
Institución organizadora
ISSN
2591-5312
eISSN
ISBN
Idioma
Español
Tipo del evento
Clasificación temática
Resumen
El objetivo de este trabajo es realizar el diagnóstico del comportamiento térmico de edificios mediante el uso de la termografía infrarroja y evaluar la utilidad de esta herramienta para una evaluación rápida y confiable. Se seleccionó un barrio representativo de la edificación existente en la ciudad de Mendoza, Argentina (32°40’ Lat. Sur, 68°51’ Long. Oeste, 750 m s. n. m.). Se trabajó con 48 perfiles urbanos, 12 en cada una de las cuatro orientaciones de la cuadrícula. Se siguió un protocolo específico: 1) Se procedió a la toma de imágenes termográficas en dos momentos del día, la tarde-noche y la mañana temprano, para evitar posibles errores debidos a la incidencia de radiación solar directa. 2) La emisividad se introdujo en la cámara de acuerdo con estudios de materiales locales. Al mismo tiempo, se realizaron mediciones continuas de la temperatura del aire en el interior y exterior con registradores de datos con el objetivo de examinar en detalle los resultados obtenidos mediante el estudio termográfico.
The objective of this work is to diagnose the thermal behaviour of buildings through the use of infrared thermography, and to evaluate the usefulness of this tool for a fast and reliable diagnosis. A district, representative of the existing building, was selected in the city of Mendoza, Argentina (32°40' Lat. South 68°51' Long. West, 750 m a. s. l.). We worked with 48 urban profiles, 12 in each of the four orientations of the grid. A specific protocol was followed: 1) Thermographic images were taken at two times of the day, in the evening and in the early morning, to avoid possible errors due to the incidence of direct solar radiation. 2) The emissivity was introduced into the chamber according to local materials studies.At the same time continuous measurement of air temperature inside and outside were taken with data-loggers with the objective of examining in detail the obtained results by the thermographic survey.
The objective of this work is to diagnose the thermal behaviour of buildings through the use of infrared thermography, and to evaluate the usefulness of this tool for a fast and reliable diagnosis. A district, representative of the existing building, was selected in the city of Mendoza, Argentina (32°40' Lat. South 68°51' Long. West, 750 m a. s. l.). We worked with 48 urban profiles, 12 in each of the four orientations of the grid. A specific protocol was followed: 1) Thermographic images were taken at two times of the day, in the evening and in the early morning, to avoid possible errors due to the incidence of direct solar radiation. 2) The emissivity was introduced into the chamber according to local materials studies.At the same time continuous measurement of air temperature inside and outside were taken with data-loggers with the objective of examining in detail the obtained results by the thermographic survey.
Colecciones
Aprobación
Revisión
Complementado por
Referenciado por
Licencia Creative Commons
Excepto donde se indique lo contrario, la licencia de este ítem se describe como by-nc-nd
