Green synthesis of allyl alcohol via deoxydehydration of glycerol on supported metal catalysts
; Luggren, Pablo Jorge
; Díez, Verónica K. Otros responsables
Fecha
07/2026
Editorial
Korean Soc Industrial Engineering Chemistry
Revista
Journal Of Industrial And Engineering Chemistry
Título del libro
Nombre del evento
Fecha del evento
Institución organizadora
ISSN
1226-086X
eISSN
ISBN
Idioma
Inglés
Tipo del evento
Clasificación temática
Resumen
Deoxydehydration (DODH) reactions are transformations that convert vicinal hydroxyl groups into olefins and unsaturated alcohols with the help of an H-donor co-reactant (reductant). The synthesis of allyl alcohol (AA) from glycerol (GLY) via DODH reaction was studied. Metal-based solid catalysts, specifically those containing Re, Mo, and Ce, were developed on various MyOx supports and Cs2.5H0.5PW12O40 using incipient wetness impregnation method. A series of Re/Al2O3 solids with different rhenium loading was also prepared. Their chemical, textural, structural, acid-base, and morphological properties were analyzed using different physicochemical and spectroscopic techniques, such as N2 physisorption, inductively coupled plasma, X-ray fluorescence, X-ray diffraction (XRD), temperature-programmed desorption (TPD) of CO2 and NH3, high-resolution transmission electron microscopy, and energy-dispersive X-ray spectroscopy. The XRD analysis indicated that the catalysts exhibited only the characteristic signals of the oxide supports and Cs2.5H0.5PW12O40. CO2 and NH3-TPD experiments demonstrated that most of the solids exhibit low basicity, while rhenium acted as the best promoter, giving the support the required Lewis acid properties. The catalytic performance of these solids was evaluated during DODH of GLY using long-chain branched alcohols (2-hexanol and methyl isobutyl carbinol) as coreactants. The impact of various reaction conditions, including promoter metal on supports, reaction temperature, acid-base nature of catalyst support, and Re content in Re/Al2O3 solids, was assessed. The 5.2Re/Al2O3 catalyst achieved the highest GLY conversion (99.0 %) and an AA yield of 60.0 % at 443 K, using 1.0 g of catalyst, and methyl isobutyl carbinol, at 7.0 h of reaction.
Colecciones
Aprobación
Revisión
Complementado por
Referenciado por
Licencia Creative Commons
Excepto donde se indique lo contrario, la licencia de este ítem se describe como by-nc-sa
