Improvements on the ISWR Method to Obtain the Power Dissipation in Overhead Conductors Taking Into Account Their Bending Stiffness
; Teicher, Ernesto Otros responsables
Fecha
12/2025
Editorial
Institute of Electrical and Electronics Engineers
Revista
IEEE Transactions on Power Delivery
Título del libro
Nombre del evento
Fecha del evento
Institución organizadora
ISSN
0885-8977
eISSN
ISBN
Idioma
Inglés
Tipo del evento
Clasificación temática
Palabras clave
Resumen
In this work, a correction for the characteristic impedance used to calculate the power dissipated by overhead conductors subjected to wind vibrations is implemented, which takes into account the influence of the bending stiffness of such conductors. The correction allows the dissipated power calculated with the Inverse Standing Wave Ratio (ISWR) Method to be consistent with that obtained with the Power Method. This consistency also requires that the amplitudes of the nodes used in the ISWR Method are obtained with good precision, considering that the location of these nodes is difficult to establish in practical cases. For this purpose, a simple and effective technique is proposed that allows obtaining the amplitude of each analyzed node using a pair of transducers placed on both sides of its experimentally adjusted theoretical position.
Colecciones
Aprobación
Revisión
Complementado por
Referenciado por
Licencia Creative Commons
Excepto donde se indique lo contrario, la licencia de este ítem se describe como by-nc-sa
