Artículo

Transition metal-based bimetallic catalysts for the chemoselective hydrogenation of furfuraldehyde

Vetere, Virginia Icon; Merlo, Andrea Beatriz Icon; Ruggera, José Fernando Icon; Casella, Mónica Laura Icon

Otros responsables

Fecha

2010-03-01

Editorial

Sociedade Brasileira de Química

Revista

Journal of the Brazilian Chemical Society

Título del libro

Nombre del evento

Fecha del evento

Institución organizadora

ISSN

0103-5053

eISSN

1678-4790

ISBN

Idioma

Inglés

Tipo del evento

Clasificación temática

Resumen

In this work, the liquid-phase chemoselective hydrogenation of furfural was studied, employing Pt, Rh and Ni-based catalysts. Bimetallic systems, containing different amounts of tin, were obtained by means of controlled surface reactions between a monometallic catalyst and Sn(C4H 9)4. The results obtained when monometallic catalysts were employed suggest a relationship between metal properties and the activity and selectivity obtained. All systems allowed obtaining furfuryl alcohol with high selectivity (99, 97 and 76% were achieved with Pt, Rh and Ni catalysts, respectively). The addition of tin has different effects on the three systems, both in terms of conversion and selectivity. An interesting result was obtained for the Ni-based catalysts, for which the addition of tin led to a significant increase in furfuryl alcohol selectivity and, depending on the Sn/Ni ratio, also to an increase in the catalytic activity of the system.
Neste trabalho foi estudada a hidrogenação quimiosseletiva em fase líquida do furfural, empregando-se catalisadores baseados em Pt, Rh e Ni. Sistemas bimetálicos, contendo diferentes quantidades de estanho, foram obtidos por meio de reações de superfície controlada entre um catalisador monometálico e Sn(C4 H9)4. Quando foram utilizados catalisadores monometálicos, os resultados obtidos sugerem uma relação entre as propriedades do metal e da atividade e seletividade. Todos os sistemas permitiram a obtenção do álcool furfurílico com alta seletividade (99, 97 e 76% com catalisadores de Pt, Rh e Ni, respectivamente). A adição de estanho tem efeitos diferentes sobre os três sistemas, tanto em termos de conversão quanto na seletividade. Um resultado interessante foi obtido para os catalisadores baseados em Ni, para os quais a adição de estanho levou a um aumento significativo da seletividade do álcool furfurílico e, dependendo da razão Sn/Ni, também há um aumento na atividade catalítica do sistema

Aprobación

Revisión

Complementado por

Referenciado por

Licencia Creative Commons

Excepto donde se indique lo contrario, la licencia de este ítem se describe como by