Artículo

Ultramicropore-influenced mechanism of oxygen electroreduction on metal-free carbon catalysts

Barrera Diaz, Deicy Amparo Icon; Florent, Marc Icon; Kulko, Margarita ; Bandosz, Teresa J. Icon

Otros responsables

Fecha

11/2019

Editorial

Royal Society of Chemistry

Revista

Journal of Materials Chemistry A

Título del libro

Nombre del evento

Fecha del evento

Institución organizadora

ISSN

2050-7488

eISSN

2050-7496

ISBN

Idioma

Inglés

Tipo del evento

Clasificación temática

Resumen

Two series of microporous carbon catalysts were prepared from ordered mesoporous carbon obtained from sucrose and KIT-6 as a carbon source and template, respectively. To modify surface features, the mother sample carbon was oxidized and then exposed to ammonia at 600, 800 and 950 °C. The latter treatment resulted in an introduction of nitrogen species to the carbons' matrices. The N-modified carbons had almost identical porosities and differed mainly in the content of nitrogen and oxygen on the surface. Moreover, the environment of the nitrogen groups on the surface did not show marked variations. To further modified N-free samples, the oxidized carbons was reduced by heating at 950 °C. Mother carbon, its oxidized and reduced counterparts made a series of N-free samples which differed markedly not only in the porosity but also in the content of oxygen groups. Prepared carbons were tested as ORR electrocatalysts in an alkaline electrolyte. The results indicated N-free carbons as the most efficient ORR catalysts from the views point of the number of electron transfer and kinetic current density (3.98 and 60 mA cm-2, respectively) The superior performance was linked to the high volume of small pores similar in size to the O2 molecule. This pore effect is complex since a strong adsorption of oxygen promoting the reduction process in ultramicropores and the access of electrolyte with dissolved oxygen to these pores are important. Therefore, to account for new factor addressing the effects of these features was proposed. It is referred to as a Pore Influence Factor, PIF, and it combines the number of dissociating groups (affecting hydrophilicity), ECSA and volume of ultramicropores (affecting O2 adsorption). It was established that the number of electrons transfer strongly depends on this factor. A direct dependence of the current density on the volume of micro and ultramicropores was also found for the N-free series of carbons.

Colecciones

Aprobación

Revisión

Complementado por

Referenciado por

Licencia Creative Commons

Excepto donde se indique lo contrario, la licencia de este ítem se describe como by-nc-sa