Solidification, macrostructure and shrinkage formation of ductile and compacted irons

Abstract

This manuscript summarizes recent investigation of the authors into the solidification and shrinkage defect formation of ductile and compacted graphite cast irons. The study makes use of the DAAS (direct austempering after solidification) technique, developed earlier by some of the authors, to reveal the solidification grains. In addition, color metallography is used to reveal the microsegregation pattern. The formation of shrinkage defects is related to both the solidification macrostructure and the microsegregation pattern. The examination of the macrostructure shows that large solidification grains, composed by dendritic austenite and graphite, characterize the solidification of compacted graphite irons of carbon equivalent values ranging from hypoeutectic to hypereutectic. Similar results are observed for ductile iron, but in this case, the hypereutectic irons display a finer macrostructure. The characteristics of the primary austenite dendrites are revealed by the microsegregation pattern, which is exposed by the color etching reagent. This pattern also clarifies the nature of the interaction between the growing austenite and the compact and spheroidal graphite particles. The microshrinkage cavities in both ductile and compacted graphite irons form at the interior of the austenite grains, where fluid feeding cannot compensate the contraction of the last-to-freeze portions of the melt. Schematics of the solidification of ductile and compacted irons are proposed, accounting for the experimental observations.