Artículo

Estabilidad térmica de aleaciones de magnesio Procesadas por Friccion-Agitación (FSP)

Delfino, Pablo María ; Svoboda, Hernán Gabriel Icon; Svoboda, Hernán Gabriel Icon

Otros responsables

Fecha

04/2018

Editorial

Universidade Federal do Rio de Janeiro

Revista

Matéria

Título del libro

Nombre del evento

Fecha del evento

Institución organizadora

ISSN

1517-7076

eISSN

ISBN

Idioma

Español

Tipo del evento

Clasificación temática

Resumen

La superplasticidad está caracterizada por una extensa deformación plástica previa a la fractura, generalmente a elevada temperatura. En el modo de superplasticidad por estructura fina, el deslizamiento de fronteras de grano es el mecanismo que controla la deformación superplástica. Para lograr esta estructura de grano fino se puede utilizar algún proceso que introduzca una deformación plástica severa, como el Procesamiento por Fricción Agitación (FSP). Sin embargo, se debe tener en cuenta la estabilidad térmica de la estructura obtenida, la cual está asociada a la capacidad que tiene la misma de soportar calentamientos sin que se produzca crecimiento anormal de grano. Por otra parte, el interés por obtener estructuras más livianas en la industria del transporte ha promovido a la incorporación de las aleaciones de magnesio.
Superplasticity is defined by an extended plastic deformation previous to fracture, generally at high temperatures. In the mode of fine structures superplasticity, grain boundary sliding is the controlling mechanism. To achieve this fine grained structure it could be used any Severe Plastic Deformation (SPD) process like Friction Stir Processing (FSP). Nevertheless, it must be consider the thermal stability of the microstructure produced, which is related to its capacity to resist heating without experiment abnormal grain growth. The use of magnesium alloys has been promoted in the automotive industry in order to reduce weight of the structures. The aim of this work is to study the thermal stability of the AZ31 friction stir processed microstructure. Sheets of 3 mm thickness were obtained in as cast condition. These sheets were FSProcessed. Samples of AZ31 FSPed were heat treated to 300, 350, 400 and 450 ºC, during 10, 30 and 60 min. These 12 conditions plus the base material were microstructurally characterized. Vickers microhardness profiles were also measured. Grain growth kinetics was analyzed and related with time and temperature.

Aprobación

Revisión

Complementado por

Referenciado por

Licencia Creative Commons

Excepto donde se indique lo contrario, la licencia de este ítem se describe como by-nc-sa