Evaluación del desempeño energético de viviendas en San Juan, Argentina: escala propuesta

Otros responsables
Fecha
12/2024
Editorial
Universidad de Chile. Facultad de Arquitectura y Urbanismo. Departamento de Arquitectura
Revista
Revista de Arquitectura
Título del libro
Nombre del evento
Fecha del evento
Institución organizadora
ISSN
0719-5427
eISSN
ISBN
Idioma
Español
Tipo del evento
Clasificación temática
Palabras clave
Resumen
El objetivo de este trabajo es dar un primer paso hacia la creación de una escala del índice de prestaciones energéticas de viviendas en la ciudad de San Juan, Argentina. Para ello, se relevan las características georreferenciales y técnico-constructivas de cuatro viviendas piloto. Luego, se calcula el índice de prestaciones energéticas promedio utilizando el software en línea AIN. Este valor se clasifica de acuerdo con los criterios de la Secretaría de Energía, para ubicarse en el centro de la categoría E dentro de una escala de eficiencia energética que abarca siete niveles, de la letra A a la G. Las demás categorías se establecen mediante rangos de variabilidad porcentual. Los resultados muestran que el índice óptimo de prestaciones energéticas para esta región es de 60 kWh/m2-año, mientras que las categorías menos eficientes, como E, F y G, se sitúan en 255 kWh/m2-año, 345 kWh/m2-año y 435 kWh/m2-año, respectivamente.
The objective of this work is to take a first step towards creating an Energy Performance Index scale for residential buildings in the City of San Juan, Argentina. To achieve this, the georeferential and technical-constructive characteristics of four pilot homes are surveyed. Then, the average energy performance index is calculated using the online software AIN. This value is categorized according to the criteria set by the Secretariat of Energy, positioning it in the middle of category E within an energy efficiency scale that encompasses seven levels, from A to G. The other categories are established through ranges of percentage variability. The results indicate that the optimal energy performance index for this region is 60 kWh/m²-year, while the less efficient categories, such as E, F, and G, are situated at 255 kWh/m²-year, 345 kWh/m²-year, and 435 kWh/m²-year, respectively.
The objective of this work is to take a first step towards creating an Energy Performance Index scale for residential buildings in the City of San Juan, Argentina. To achieve this, the georeferential and technical-constructive characteristics of four pilot homes are surveyed. Then, the average energy performance index is calculated using the online software AIN. This value is categorized according to the criteria set by the Secretariat of Energy, positioning it in the middle of category E within an energy efficiency scale that encompasses seven levels, from A to G. The other categories are established through ranges of percentage variability. The results indicate that the optimal energy performance index for this region is 60 kWh/m²-year, while the less efficient categories, such as E, F, and G, are situated at 255 kWh/m²-year, 345 kWh/m²-year, and 435 kWh/m²-year, respectively.
Colecciones
Aprobación
Revisión
Complementado por
Referenciado por
Licencia Creative Commons
Excepto donde se indique lo contrario, la licencia de este ítem se describe como by-nc-sa
