<link rel="stylesheet" href="/res/styles.39be4579664c3a48.css">
Artículo

Synthesis and Antimicrobial Properties Pectin + CuNi Films and Characterization by Scanning Electron Microscopy

Illanez, Yamila Ayelén ; Cangiano, Maria Corina ; Lambrese, Yésica Sabrina Icon; Fernández, Cecilia de los Ángeles ; Esquivel, Marcelo Ricardo Oscar Icon; Cangiano, Maria de Los Angeles Icon

Otros responsables

Fecha

11/2025

Editorial

Japan Bilingual Publishing Co.

Revista

New Environmentally-Friendly Materials

Título del libro

Nombre del evento

Fecha del evento

Institución organizadora

ISSN

2758-3163

eISSN

ISBN

Idioma

Inglés

Tipo del evento

Clasificación temática

Resumen

The synthesis of pectin-based films containing nanoparticles of CuNi (NPs), with potential antimicrobial properties, as an active solid is presented in this work. The NPs were dispersed in pure pectin to be used as food packaging in the food industry. The samples obtained were laid flat to characterize the sample thickness. The goal of this work is to find appropriate electron microscopy techniques to characterize the dispersion of the NPs on the pectin film and the pectin microstructural and antimicrobial characteristics properly. Different microstructural techniques of scanning electron microscopy modes were used to study the films, including low-voltage scanning electron microscopy (SEM) and low-voltage energy-dispersive spectroscopy (EDS). The condition of low beam voltage allows the sample characterization without destroying the sample surface/bulk due to electron irradiation. The pectin films containing raw NPs (pectin + NPs) and milled NPs (pectin + milled NPs) were observed by SEM in two different image modes: secondary electrons (SE) and backscattered electrons (BSE). The last mode allows the identification of sample components, i.e., matrix + samples containing different atomic Z numbers. This fact allows us to know the distribution of the metal particles within the volume of the sample. The results obtained in this work are relevant for the characterization and further use of these films in the protection of snacks in the food industry.

Aprobación

Revisión

Complementado por

Referenciado por

Licencia Creative Commons

Excepto donde se indique lo contrario, la licencia de este ítem se describe como by