Energia útil en una bicicleta: Modelado y validación experimental de un recolector de energía piezoeléctrico
; Machado, Sebastián Pablo 
Otros responsables
Fecha
2021
Editorial
Asociación Argentina de Mecánica Computacional
Revista
Título del libro
Nombre del evento
XXXVII Congreso Argentino de Mecánica Computacional
Fecha del evento
2021-11-01
Institución organizadora
Asociación Argentina de Mecánica Computacional
ISSN
1666-6070
eISSN
2591-3522
ISBN
Idioma
Español
Tipo del evento
Congreso
Clasificación temática
Palabras clave
Resumen
En este trabajo se estudia e implementa un recolector de energía piezoeléctrico en una bicicleta. Para ello se miden las aceleraciones de sus diferentes partes y se obtienen las posiciones en donde se registra la mayor aceleración. Luego se diseña el recolector de energía piezoeléctrico para aprovechar las aceleraciones máximas. La tensión saliente del piezoeléctrico (alterna) es rectificada con un puente de diodos y un capacitor para alimentar a una resistencia de carga en forma de energía útil (tensión continua). Las ecuaciones diferenciales, tanto del recolector como del circuito rectificador (diodos, capacitor y resistencia), son presentadas y resueltas numéricamente. Los resultados son comparados favorablemente con la implementación del recolector en una bicicleta, donde la aceleración medida es la excitación para la resolución numérica.
In this work, a piezoelectric energy harvester is studied and implemented on a bike. For this, the accelerations of its different parts are measured and the positions where the the greatest acceleration are obtained. The piezoelectric energy harvester is then designed to take advantage of the maximum accelerations. The output voltage of the piezoelectric (AC voltage) is rectified with a diode bridge and a capacitor, to supply a load resistance in the form of useful energy (DC voltage). The differential equations of both the harvester and the rectifier circuit (diodes, capacitor and resistance) are presented and solved numerically. The results are compared favorably with the implementation of the harvester on a bike, where the measured acceleration is the input for the numerical solution.
In this work, a piezoelectric energy harvester is studied and implemented on a bike. For this, the accelerations of its different parts are measured and the positions where the the greatest acceleration are obtained. The piezoelectric energy harvester is then designed to take advantage of the maximum accelerations. The output voltage of the piezoelectric (AC voltage) is rectified with a diode bridge and a capacitor, to supply a load resistance in the form of useful energy (DC voltage). The differential equations of both the harvester and the rectifier circuit (diodes, capacitor and resistance) are presented and solved numerically. The results are compared favorably with the implementation of the harvester on a bike, where the measured acceleration is the input for the numerical solution.
Colecciones
Aprobación
Revisión
Complementado por
Referenciado por
Licencia Creative Commons
Excepto donde se indique lo contrario, la licencia de este ítem se describe como by-nc-sa
