Cloud-point extraction/preconcentration on-line flow injection method for mercury determination
; Di Nezio, Maria Susana ; Lista, Adriana Guillermina ; Palomeque, Miriam Edid ; Fernández Band, Beatriz Susana 
Otros responsables
Fecha
01/2004
Editorial
Elsevier Science
Revista
Analytica Chimica Acta
Título del libro
Nombre del evento
Fecha del evento
Institución organizadora
ISSN
0003-2670
eISSN
ISBN
Idioma
Inglés
Tipo del evento
Clasificación temática
Palabras clave
Resumen
A cloud-point extraction/preconcentration (CPE/P) step is incorporated on-line into a flow injection system which is used to determine low levels of Hg(II) added to natural water samples. The analyte is complexed with dithizone. A solid reagent column (SRC) is used to prepare the reagent on-line by using 5% (v/v) Triton X-100 solution as solvent. The CPE/P is carried out by using the non-ionic surfactant Triton X-100. After obtaining the cloud-point on-line, the surfactant-rich phase containing the complex is collected in a mini column packed with cotton wool. Then, a hot water stream is passed through the column to elute the complex and the absorbance is measured at 500nm. All the flow and chemical variables are optimized and the enhancement factor for the system is estimated. The calibration is linear over the range 0.05-0.5μgml -1, the R.S.D. is 4.8%, the limit of detection (signal:noise = 3) is 0.014μgml-1 and the sample throughput is 30h-1. An open/closed system is used to eliminate the interference of iron(III). © 2003 Elsevier B.V. All rights reserved.
Colecciones
Aprobación
Revisión
Complementado por
Referenciado por
Licencia Creative Commons
Excepto donde se indique lo contrario, la licencia de este ítem se describe como by-nc-sa
