Evento
A Geometric modeling approach for flexible, printed square planariInductors under stretch
Maroli, Gabriel; Fontana, Andrés; Pazos, Sebastian; Palumbo, Felix Roberto Mario
; Julian, Pedro Marcelo
Tipo del evento:
Conferencia
Nombre del evento:
2021 Argentine Conference on Electronics
Fecha del evento:
11/03/2021
Institución Organizadora:
Universidad Nacional del Sur;
Título del Libro:
2021 Argentine Conference on Electronics
Editorial:
Institute of Electrical and Electronics Engineers
ISBN:
9781728175799
Idioma:
Inglés
Clasificación temática:
Resumen
In this work a compact model for square planar inductors printed on flexible substrate is proposed. The approach considers the deformation of the metal traces of square spiral inductors when the substrate is subjected to physical stretch. The model considers a typical pi-network for the device, where each component is calculated for different stretching values adapting widely accepted models on the literature for the total inductance, the AC resistance and the ground coupling and inter-wounding capacitances. Model results are contrasted to 3D full electromagnetic wave simulations under parametric sweeps of the dimensions calculated under stretch. Results show good agreement within a 20 % stretch up to the first resonance frequency of the structure. The model can prove useful for the optimization of component design for printed applications on flexible substrates.
Palabras clave:
inductors
,
modeling
,
cmos
,
microelectronics
Archivos asociados
Licencia
Identificadores
Colecciones
Eventos(IIIE)
Eventos de INST.DE INVEST.EN ING.ELECTRICA "A.DESAGES"
Eventos de INST.DE INVEST.EN ING.ELECTRICA "A.DESAGES"
Citación
A Geometric modeling approach for flexible, printed square planariInductors under stretch; 2021 Argentine Conference on Electronics; Argentina; 2021; 1-6
Compartir
Altmétricas