Repositorio Institucional
Repositorio Institucional
CONICET Digital
  • Inicio
  • EXPLORAR
    • AUTORES
    • DISCIPLINAS
    • COMUNIDADES
  • Estadísticas
  • Novedades
    • Noticias
    • Boletines
  • Ayuda
    • General
    • Datos de investigación
  • Acerca de
    • CONICET Digital
    • Equipo
    • Red Federal
  • Contacto
JavaScript is disabled for your browser. Some features of this site may not work without it.
  • INFORMACIÓN GENERAL
  • RESUMEN
  • ESTADISTICAS
 
Artículo

Note: Physical Properties of High Oleic Sunflower Seeds

Santalla, Estela Mercedes; Mascheroni, Rodolfo HoracioIcon
Fecha de publicación: 12/2003
Editorial: Sage Publications Ltd
Revista: Food Science and Technology International
ISSN: 1082-0132
e-ISSN: 1532-1738
Idioma: Inglés
Tipo de recurso: Artículo publicado
Clasificación temática:
Ingeniería de Procesos Químicos

Resumen

High oleic sunflower seeds evaluated at 5.6% moisture content (dry basis) showed a surface area of approximately 102.41 mm2 with an average length, width, thickness and unit mass of 11.526, 5.008 and 2.809 mm and 0.055 g, respectively. Corresponding values for the kernel were 8.802, 3.897 and 1. 907 mm and 0.036 g. The mean equivalent diameter and sphericity of the seeds were 5.49 mm and 0.46, respectively, while corresponding values for the kernels were 4.01 mm and 0.44. True density increased, within a moisture range of 4-26% d.b., between 652 and 708 kg/m3 for the seed, between 1015 and 1057 kg/m3 for the kernel and between 636 and 760 kg/m3 for the hull. The bulk density decreased from 386 to 373 kg/m3 for seeds and from 260 to 220 kg/m3 for hulls and increased from 535 to 553 kg/m3 for the kernels. Porosity increased from 41.2 to 47.1% in seeds, from 47.2 to 47.7% in kernels and from 59.2 to 70.1% in hull. Terminal velocity of seeds increased with moisture content between 2.8 and 5.5 m/s for seed, between 1.8 and 3.8 m/s for kernel and between 1.1 and 1.9 m/s for hull. Drag coefficient decreased when moisture content increased and varied between 4.7 and 1.4 in seed and between 12.5 and 3.1 in kernel. Angle of repose increased with moisture content between 25 and 46° in seeds, between 35 and 55° in kernels and between 49 and 66° in hull on different surfaces and resulted higher for hull and kernel than for seed. The coefficient of static friction was higher for kernel than that for seed and hull and also was higher on wood (with grain perpendicular to the direction of the motion) and lower on acrylic and galvanised iron. This coefficient increased with moisture content from 0.23 to 0.50 for seed, from 0.37 to 0.69 for kernel and from 0.31 to 0.60 for hull. All engineering properties evaluated showed a linear dependence with moisture content, leading to simple and accurate formulae, adequate to predict their variation in the range of moisture considered.
Palabras clave: ENGINEERING , PHYSICAL PROPERTIES , SUNFLOWER SEEDS
Ver el registro completo
 
Archivos asociados
Thumbnail
 
Tamaño: 179.4Kb
Formato: PDF
.
Descargar
Licencia
info:eu-repo/semantics/openAccess Excepto donde se diga explícitamente, este item se publica bajo la siguiente descripción: Creative Commons Attribution-NonCommercial-ShareAlike 2.5 Unported (CC BY-NC-SA 2.5)
Identificadores
URI: http://hdl.handle.net/11336/128077
DOI: http://dx.doi.org/10.1177/1082013203040756
URL: https://tinyurl.com/yawpxjm8
Colecciones
Articulos(CIDCA)
Articulos de CENTRO DE INV EN CRIOTECNOLOGIA DE ALIMENTOS (I)
Citación
Santalla, Estela Mercedes; Mascheroni, Rodolfo Horacio; Note: Physical Properties of High Oleic Sunflower Seeds; Sage Publications Ltd; Food Science and Technology International; 9; 6; 12-2003; 435-442
Compartir
Altmétricas
 

Enviar por e-mail
Separar cada destinatario (hasta 5) con punto y coma.
  • Facebook
  • X Conicet Digital
  • Instagram
  • YouTube
  • Sound Cloud
  • LinkedIn

Los contenidos del CONICET están licenciados bajo Creative Commons Reconocimiento 2.5 Argentina License

https://www.conicet.gov.ar/ - CONICET

Inicio

Explorar

  • Autores
  • Disciplinas
  • Comunidades

Estadísticas

Novedades

  • Noticias
  • Boletines

Ayuda

Acerca de

  • CONICET Digital
  • Equipo
  • Red Federal

Contacto

Godoy Cruz 2290 (C1425FQB) CABA – República Argentina – Tel: +5411 4899-5400 repositorio@conicet.gov.ar
TÉRMINOS Y CONDICIONES