Repositorio Institucional
Repositorio Institucional
CONICET Digital
  • Inicio
  • EXPLORAR
    • AUTORES
    • DISCIPLINAS
    • COMUNIDADES
  • Estadísticas
  • Novedades
    • Noticias
    • Boletines
  • Ayuda
    • General
    • Datos de investigación
  • Acerca de
    • CONICET Digital
    • Equipo
    • Red Federal
  • Contacto
JavaScript is disabled for your browser. Some features of this site may not work without it.
  • INFORMACIÓN GENERAL
  • RESUMEN
  • ESTADISTICAS
 
Artículo

Influence of experimental variables on the measure of contact angle in metals using the sessile drop method

Schuster, Jonathan MaximilianoIcon ; Schvezov, Carlos EnriqueIcon ; Rosenberger, Mario RobertoIcon
Fecha de publicación: 08/2015
Editorial: Elsevier
Revista: Procedia Materials Science
ISSN: 2211-8128
Idioma: Inglés
Tipo de recurso: Artículo publicado
Clasificación temática:
Recubrimientos y Películas; Bioproductos, Biomateriales, Bioplásticos, Biocombustibles, Bioderivados, etc.

Resumen

The sessile drop method is an easy and fast method used to measure the contact angle between solids and liquids. The value of the contact angle is used in surface characterization, in particular the wettability of solid surfaces by the liquid and to calculate the surface free energy. In this work, we study the effects of the volume of the drop placed on the surface, the elapsed time between drop placing and measurement and the cleaning of the substrate (not cleaning, washed with ethanol or washed with acetone) in the value of the contact angle on Ti6Al4V and AISI 316 stainless steel. We found that drop asymmetry is a very important parameter that must be considered in CA measurements. Anasymmetry parameter used to qualify the drop asymmetry is proposed. It was also found that the degree of cleanliness produces dispersion in the contact angle values; on the other hand no differences were found between cleaning with ethanol or acetone. CA decreases with time and increases slightly with decreasing droplet volume.
Palabras clave: Contact Angle , Metals , Sessile Drop , Expermental Techniques
Ver el registro completo
 
Archivos asociados
Thumbnail
 
Tamaño: 1010.Kb
Formato: PDF
.
Descargar
Licencia
info:eu-repo/semantics/openAccess Excepto donde se diga explícitamente, este item se publica bajo la siguiente descripción: Atribución-NoComercial-SinDerivadas 2.5 Argentina (CC BY-NC-ND 2.5 AR)
Identificadores
URI: http://hdl.handle.net/11336/9089
URL: http://www.sciencedirect.com/science/article/pii/S2211812815001327
DOI: http://dx.doi.org/10.1016/j.mspro.2015.04.131
Colecciones
Articulos(IMAM)
Articulos de INST.DE MATERIALES DE MISIONES
Citación
Schuster, Jonathan Maximiliano; Schvezov, Carlos Enrique; Rosenberger, Mario Roberto; Influence of experimental variables on the measure of contact angle in metals using the sessile drop method; Elsevier; Procedia Materials Science; 8; 8-2015; 742-751
Compartir
Altmétricas
 

Enviar por e-mail
Separar cada destinatario (hasta 5) con punto y coma.
  • Facebook
  • X Conicet Digital
  • Instagram
  • YouTube
  • Sound Cloud
  • LinkedIn

Los contenidos del CONICET están licenciados bajo Creative Commons Reconocimiento 2.5 Argentina License

https://www.conicet.gov.ar/ - CONICET

Inicio

Explorar

  • Autores
  • Disciplinas
  • Comunidades

Estadísticas

Novedades

  • Noticias
  • Boletines

Ayuda

Acerca de

  • CONICET Digital
  • Equipo
  • Red Federal

Contacto

Godoy Cruz 2290 (C1425FQB) CABA – República Argentina – Tel: +5411 4899-5400 repositorio@conicet.gov.ar
TÉRMINOS Y CONDICIONES