Mostrar el registro sencillo del ítem
dc.contributor.author
Bernal, Celina Raquel
dc.contributor.author
López Montenegro, Hugo
dc.contributor.author
Frontini, Patricia Maria
dc.date.available
2019-05-23T22:22:52Z
dc.date.issued
2002-12-24
dc.identifier.citation
Bernal, Celina Raquel; López Montenegro, Hugo; Frontini, Patricia Maria; Failure prediction analysis for polyethylene flawed pipes; Pergamon-Elsevier Science Ltd; Engineering Fracture Mechanics; 70; 15; 24-12-2002; 2149-2162
dc.identifier.issn
0013-7944
dc.identifier.uri
http://hdl.handle.net/11336/77003
dc.description.abstract
Through this paper limit load analysis and the EPRI/GE procedure were applied to predict instability conditions for medium density polyethylene flawed pipes. Predicted values for internally pressurized cylinders with axial cracks and cylinders with circumferential cracks under remote tension were compared to experimental results obtained from tests conducted on full scale structures. For the pipes under internal pressure, both schemes led to critical pressure values in agreement with actual burst pressures, despite plastic collapse having been observed in the failure of these structures. For the pipes with circumferential internal cracks subjected to remote tension, the predicted loads from the EPRI procedure do not agree with experimental values whereas limit load predictions are quite satisfactory. On the other hand, for the circumferentially externally cracked pipes both predictions reasonable agree with experimental data.
dc.format
application/pdf
dc.language.iso
eng
dc.publisher
Pergamon-Elsevier Science Ltd
dc.rights
info:eu-repo/semantics/openAccess
dc.rights.uri
https://creativecommons.org/licenses/by-nc-nd/2.5/ar/
dc.subject
Failure Assessment
dc.subject
Fracture Mechanics
dc.subject
J-Integral
dc.subject
Polyethylene Pipes
dc.subject.classification
Físico-Química, Ciencia de los Polímeros, Electroquímica
dc.subject.classification
Ciencias Químicas
dc.subject.classification
CIENCIAS NATURALES Y EXACTAS
dc.subject.classification
Recubrimientos y Películas
dc.subject.classification
Ingeniería de los Materiales
dc.subject.classification
INGENIERÍAS Y TECNOLOGÍAS
dc.title
Failure prediction analysis for polyethylene flawed pipes
dc.type
info:eu-repo/semantics/article
dc.type
info:ar-repo/semantics/artículo
dc.type
info:eu-repo/semantics/publishedVersion
dc.date.updated
2019-05-15T16:44:46Z
dc.journal.volume
70
dc.journal.number
15
dc.journal.pagination
2149-2162
dc.journal.pais
Países Bajos
dc.journal.ciudad
Amsterdam
dc.description.fil
Fil: Bernal, Celina Raquel. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentina
dc.description.fil
Fil: López Montenegro, Hugo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentina
dc.description.fil
Fil: Frontini, Patricia Maria. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentina
dc.journal.title
Engineering Fracture Mechanics
dc.relation.alternativeid
info:eu-repo/semantics/altIdentifier/doi/http://dx.doi.org/10.1016/S0013-7944(02)00239-4
dc.relation.alternativeid
info:eu-repo/semantics/altIdentifier/url/https://www.sciencedirect.com/science/article/pii/S0013794402002394?via%3Dihub
Archivos asociados