Artículo
Evaluation and modelling of integral capacitors produced by interdigitated comb electrodes
Ramajo, Leandro Alfredo
; Ramajo, Damian Enrique
; Reboredo, Maria Marta
; Santiago, Diego Hernan
; Castro, Miriam Susana
Fecha de publicación:
10/12/2008
Editorial:
Universidade Federal de São Carlos
Revista:
Materials Research
ISSN:
1516-1439
e-ISSN:
1980-5373
Idioma:
Inglés
Tipo de recurso:
Artículo publicado
Clasificación temática:
Resumen
Integral capacitors (IC) of one or two-layer printed wiring board (PWB) circuits were produced using comb electrodes fixtures and dielectric composites as the inter-electrode material. ICs were fabricated at laboratory scale, using copper comb electrodes and BaTiO3-epoxy composite materials deposited on a glass-Epoxy FR4 board. They were experimentally tested in order to obtain their electrical response. Furthermore, ICs behaviour was modelled through 2-dimensional models applying finite element method (FEM). Results showed that by this laboratory technique it was possible to obtained integral capacitors with low dielectric losses. Moreover, acceptable agreement was found between numerical and experimental capacitance results for all the different analysed ICs. In conclusion, 2D FEM models are a suitable tool to predict electric response of IC devices.
Palabras clave:
Integral Capacitors
,
Dielectric Composites
,
Fem
Archivos asociados
Licencia
Identificadores
Colecciones
Articulos(INTEMA)
Articulos de INST.DE INV.EN CIENCIA Y TECNOL.MATERIALES (I)
Articulos de INST.DE INV.EN CIENCIA Y TECNOL.MATERIALES (I)
Citación
Ramajo, Leandro Alfredo; Ramajo, Damian Enrique; Reboredo, Maria Marta; Santiago, Diego Hernan; Castro, Miriam Susana; Evaluation and modelling of integral capacitors produced by interdigitated comb electrodes; Universidade Federal de São Carlos; Materials Research; 11; 4; 10-12-2008; 471-476
Compartir
Altmétricas