Mostrar el registro sencillo del ítem

dc.contributor.author
Sieben, Juan Manuel  
dc.contributor.author
Duarte, Marta María Elena  
dc.contributor.author
Mayer, Carlos Enrique  
dc.date.available
2018-12-21T14:09:16Z  
dc.date.issued
2011-03  
dc.identifier.citation
Sieben, Juan Manuel; Duarte, Marta María Elena; Mayer, Carlos Enrique; Influence of alcohol additives in the preparation of electrodeposited Pt-Ru catalysts on oxidized graphite cloths; Elsevier Science Sa; Journal of Alloys and Compounds; 509; 9; 3-2011; 4002-4009  
dc.identifier.issn
0925-8388  
dc.identifier.uri
http://hdl.handle.net/11336/66890  
dc.description.abstract
Carbon supported Pt-Ru catalysts were prepared by multiple cycles of potentiostatic pulses from aqueous diluted chloroplatinic acid and ruthenium chloride solutions in the presence of ethanol or ethylene glycol at pH 2 and 5. SEM images showed that the metallic deposit prepared at pH 2 consisted of large irregular agglomerates, whereas smaller globular particles were obtained at pH 5. In addition, the average particle size was considerably decreased in the presence of the stabilizers. The supported Pt-Ru alloys were tested as catalysts for methanol electro-oxidation in acid media. Electrocatalytic activity measurements indicated that the most active electrode was obtained with ethylene glycol as additive at pH 5. © 2011 Elsevier B.V. All rights reserved.  
dc.format
application/pdf  
dc.language.iso
eng  
dc.publisher
Elsevier Science Sa  
dc.rights
info:eu-repo/semantics/openAccess  
dc.rights.uri
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/  
dc.subject
Electrodeposition  
dc.subject
Ethanol  
dc.subject
Ethylene Glycol  
dc.subject
Methanol Electro-Oxidation  
dc.subject
Pt-Ru Alloys  
dc.subject.classification
Recubrimientos y Películas  
dc.subject.classification
Ingeniería de los Materiales  
dc.subject.classification
INGENIERÍAS Y TECNOLOGÍAS  
dc.title
Influence of alcohol additives in the preparation of electrodeposited Pt-Ru catalysts on oxidized graphite cloths  
dc.type
info:eu-repo/semantics/article  
dc.type
info:ar-repo/semantics/artículo  
dc.type
info:eu-repo/semantics/publishedVersion  
dc.date.updated
2018-12-20T18:16:05Z  
dc.journal.volume
509  
dc.journal.number
9  
dc.journal.pagination
4002-4009  
dc.journal.pais
Países Bajos  
dc.journal.ciudad
Amsterdam  
dc.description.fil
Fil: Sieben, Juan Manuel. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Universidad Nacional del Sur. Departamento de Ingeniería Química. Instituto de Ingeniería Electroquímica y Corrosión; Argentina  
dc.description.fil
Fil: Duarte, Marta María Elena. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Universidad Nacional del Sur. Departamento de Ingeniería Química. Instituto de Ingeniería Electroquímica y Corrosión; Argentina. Provincia de Buenos Aires. Gobernación. Comisión de Investigaciones Científicas; Argentina  
dc.description.fil
Fil: Mayer, Carlos Enrique. Universidad Nacional del Sur. Departamento de Ingeniería Química. Instituto de Ingeniería Electroquímica y Corrosión; Argentina  
dc.journal.title
Journal of Alloys and Compounds  
dc.relation.alternativeid
info:eu-repo/semantics/altIdentifier/url/http://www.sciencedirect.com/science/article/pii/S0925838811000181  
dc.relation.alternativeid
info:eu-repo/semantics/altIdentifier/doi/https://doi.org/10.1016/j.jallcom.2011.01.003