Repositorio Institucional
Repositorio Institucional
CONICET Digital
  • Inicio
  • EXPLORAR
    • AUTORES
    • DISCIPLINAS
    • COMUNIDADES
  • Estadísticas
  • Novedades
    • Noticias
    • Boletines
  • Ayuda
    • General
    • Datos de investigación
  • Acerca de
    • CONICET Digital
    • Equipo
    • Red Federal
  • Contacto
JavaScript is disabled for your browser. Some features of this site may not work without it.
  • INFORMACIÓN GENERAL
  • RESUMEN
  • ESTADISTICAS
 
Artículo

Characterization of PP/TPV/MMT Ternary Nanocomposites Produced by Injection Molding

Costantino, María AlejandraIcon ; Rueda, FedericoIcon ; Pettarin, ValeriaIcon ; Frontini, Patricia MariaIcon ; Pontes, Antonio J.; Viana, Julio C.
Fecha de publicación: 22/06/2017
Editorial: Wiley
Revista: Macromolecular Symposia
ISSN: 1022-1360
Idioma: Inglés
Tipo de recurso: Artículo publicado
Clasificación temática:
Recubrimientos y Películas

Resumen

One of the most valued and required features of new polymers are a high level of stiffness combined with good toughness. In this way, it seems useful to combine nanoclay reinforcement with rubber toughening to balance end use performance. In this work, the feasibility of producing this kind of nanocomposites by direct injection molding is evaluated. The performance of actual injected pieces of polypropylene (PP) compounded with thermoplastic vulcanizate (TPV) and organoclay (MMT) is analyzed and compared. Ternary composite presents low warpage and so better final quality. Morphology developed in actual pieces is influenced both by processing and by MMT presence, this morphology giving place to alternative deformation mechanisms and crack arrest. Also, a good impact resistance compared with neat PP is observed. Weld lines are diluted and they do not act as stress concentrators, this being of mechanical and aesthetical interest. The use of PP/TPV/MMT seems to be promising for injected moldings.
Palabras clave: Injection Molding , Mechanical Performance , Nanoclay , Polypropylene , Thermoplastic Vulcanizate
Ver el registro completo
 
Archivos asociados
Thumbnail
 
Tamaño: 1.913Mb
Formato: PDF
.
Descargar
Licencia
info:eu-repo/semantics/openAccess Excepto donde se diga explícitamente, este item se publica bajo la siguiente descripción: Creative Commons Attribution-NonCommercial-ShareAlike 2.5 Unported (CC BY-NC-SA 2.5)
Identificadores
URI: http://hdl.handle.net/11336/64362
DOI: http://dx.doi.org/10.1002/masy.201600153
URL: https://onlinelibrary.wiley.com/doi/abs/10.1002/masy.201600153
Colecciones
Articulos(INTEMA)
Articulos de INST.DE INV.EN CIENCIA Y TECNOL.MATERIALES (I)
Citación
Costantino, María Alejandra; Rueda, Federico; Pettarin, Valeria; Frontini, Patricia Maria; Pontes, Antonio J.; et al.; Characterization of PP/TPV/MMT Ternary Nanocomposites Produced by Injection Molding; Wiley; Macromolecular Symposia; 373; 1; 22-6-2017
Compartir
Altmétricas
 

Enviar por e-mail
Separar cada destinatario (hasta 5) con punto y coma.
  • Facebook
  • X Conicet Digital
  • Instagram
  • YouTube
  • Sound Cloud
  • LinkedIn

Los contenidos del CONICET están licenciados bajo Creative Commons Reconocimiento 2.5 Argentina License

https://www.conicet.gov.ar/ - CONICET

Inicio

Explorar

  • Autores
  • Disciplinas
  • Comunidades

Estadísticas

Novedades

  • Noticias
  • Boletines

Ayuda

Acerca de

  • CONICET Digital
  • Equipo
  • Red Federal

Contacto

Godoy Cruz 2290 (C1425FQB) CABA – República Argentina – Tel: +5411 4899-5400 repositorio@conicet.gov.ar
TÉRMINOS Y CONDICIONES