Artículo

Effluent treatment using a bipolar electrochemical reactor with rotating cylinder electrodes of wovenwire meshes

Grau, Javier Mario Icon; Bisang, Jose Maria Icon

Otros responsables

Fecha

05/2009

Editorial

John Wiley & Sons Ltd

Revista

Journal of Chemical Technology and Biotechnology

Título del libro

Nombre del evento

Fecha del evento

Institución organizadora

ISSN

0268-2575

eISSN

ISBN

Idioma

Inglés

Tipo del evento

Clasificación temática

Resumen

Background: The behaviour of a bipolar electrochemical reactor consisting of one or more rotating cylinder electrodes of woven wire meshes is reported using copper and cadmium deposition from dilute solutions as test reactions. Results: The best performance related to electrode number was determined for copper deposition and was achieved by an arrangement with two bipolar electrodes, for which the conversion in a single pass was approximately 47%. The specific energy consumption was 3.27 kWh kg-1 with a normalised space velocity of 23.05 h-1. The copper powder obtained showed a nodular and dendritic surface morphology. This reactor configuration was also analysed for cadmium deposition, in which hydrogen evolution takes place simultaneously as a side cathodic reaction, considering the effect of flow rate and total current. The maximum conversion per pass for cadmium removal was 38.91%. In this case the reactor with two bipolar electrodes showed a performance similar to that of a monopolar reactor operated at a rotation speed three times higher. Conclusion: A continuous electrochemical reactor with two rotating bipolar electrodes of woven wire meshes presents a good performance for copper or cadmium removal from dilute solutions.

Aprobación

Revisión

Complementado por

Referenciado por

Licencia Creative Commons

Excepto donde se indique lo contrario, la licencia de este ítem se describe como by-nc-sa