Artículo
A migrating corrosion inhibitor evaluated in concrete containing various contents of admixed chlorides
Fecha de publicación:
02/2002
Editorial:
Pergamon-Elsevier Science Ltd
Revista:
Cement and Concrete Research
ISSN:
0008-8846
Idioma:
Inglés
Tipo de recurso:
Artículo publicado
Clasificación temática:
Resumen
The performance of a surface-applied migrating corrosion inhibitor (MCI) based on an alkylaminoalcohol was evaluated on concrete specimens containing reinforcing steel bar (rebar) segments. Two water/cement ratios (w/c's), various chloride contents and two exposure conditions were investigated. The inhibiting efficiency was followed over a period of 1000 days by means of parameters such as corrosion potential, corrosion current and electrical resistance. Results show that when concrete is exposed to the marine environment, the inhibitor is able to reduce the corrosion rate (CR) only when the initial chloride content is below 0.16 wt.% relative to cement content. Efficiency increases as the w/c increases. There is no beneficial effect when the initial chloride content is greater than 0.43%. When concrete is immersed in a saline solution, no beneficial effect associated to the use of the inhibitor could be appreciated, regardless of w/c or initial chloride content in concrete.
Palabras clave:
Chloride
,
Corrosion
,
Durability
,
Electrochemical Properties
,
Inhibitors
Archivos asociados
Licencia
Identificadores
Colecciones
Articulos(INTEMA)
Articulos de INST.DE INV.EN CIENCIA Y TECNOL.MATERIALES (I)
Articulos de INST.DE INV.EN CIENCIA Y TECNOL.MATERIALES (I)
Citación
Morris, W.; Vazquez, Marcela Vivian; A migrating corrosion inhibitor evaluated in concrete containing various contents of admixed chlorides; Pergamon-Elsevier Science Ltd; Cement and Concrete Research; 32; 2; 2-2002; 259-267
Compartir
Altmétricas