Artículo
Electrochemical behavior of Sn-Zn alloys with different grain structures in chloride-containing solutions
Mendez, Claudia Marcela; Scheiber, Verónica L.; Rozicki, Roberto S.; Kociubczyk, Alex Iván
; Ares, Alicia Esther
Fecha de publicación:
03/01/2017
Editorial:
Elsevier
Revista:
Arabian Journal of Chemistry
ISSN:
1878-5352
e-ISSN:
1878-5379
Idioma:
Inglés
Tipo de recurso:
Artículo publicado
Clasificación temática:
Resumen
In the present research the electrochemical behavior of the Sn-Zn alloys (Sn-1 wt.%Zn, Sn-4 wt.%Zn and 8.9 wt.%Zn) in 3% NaCl solution is analyzed using potentiodynamic cyclic polarization measurements and Electrochemical Impedance Spectroscopy (EIS) technique. Specimens were longitudinally solidified with simultaneous heat extraction in two opposite directions. Working electrodes were constructed using longitudinal and cross sections of the specimens with both types of structure: columnar and equiaxed. Results obtained from the polarization curves indicated that the two types of grain structures of Sn-Zn alloys (Sn-1 wt.%Zn, Sn-4 wt.%Zn and Sn-8.9 wt.%Zn) corresponding to longitudinal section present a pseudo passive zone. In the case of specimens from cross sections of the samples, the columnar and equiaxed zones of Sn-8.9 wt.%Zn are the only ones that do not have this pseudo passive region. In addition, the interdendritic zone of alloys is susceptible to corrosion by dealloying because this phase is zinc-rich. This type of corrosion also occurs in the zinc rich lamellar structure present in the eutectic. The percentage of zinc in the alloy increases with increasing susceptibility to pitting corrosion. The EIS values obtained revealed that the susceptibility to corrosion increases with increasing zinc content in alloys, for both the columnar and equiaxed zones. In addition, the columnar zones of Sn-4 wt.%Zn and Sn-8.9 wt.%Zn specimens are more resistant to corrosion than the equiaxed grain specimens. However, the equiaxed zone of Sn-1 wt.%Zn alloy is less susceptible to corrosion than the columnar zone. After adjustment by equivalent circuits it is revealed that the equiaxed zone of Sn-8.9 wt.%Zn alloy has a second porous layer composed of corrosion products on the electrode surface.
Palabras clave:
Sn-Zn Alloys
,
Corrosion
,
Nacl
,
Grain Structures
,
Eis
Archivos asociados
Licencia
Identificadores
Colecciones
Articulos(IMAM)
Articulos de INST.DE MATERIALES DE MISIONES
Articulos de INST.DE MATERIALES DE MISIONES
Citación
Mendez, Claudia Marcela; Scheiber, Verónica L.; Rozicki, Roberto S.; Kociubczyk, Alex Iván; Ares, Alicia Esther; Electrochemical behavior of Sn-Zn alloys with different grain structures in chloride-containing solutions; Elsevier; Arabian Journal of Chemistry; 03-1-2017; 1-13
Compartir
Altmétricas