Artículo
Study of the formation of Cu-24at.% Al by reactive milling
Giordana, María Florencia
; Muñoz Vásquez, Natalia; Garro González, M.; Esquivel, Marcelo Ricardo Oscar
; Zelaya, Maria Eugenia
Fecha de publicación:
02/07/2015
Editorial:
Elsevier
Revista:
Procedia Materials Science
ISSN:
2211-8128
Idioma:
Inglés
Tipo de recurso:
Artículo publicado
Clasificación temática:
Resumen
In this work, powders of Cu and Al were milled with a proportion equal to 24 atomic % Al, using low and medium energy mills. The initial, intermediate and final stages of the resulting powder are analyzed using scanning electron microscopy, X-ray diffraction and different transmission electron microscopy techniques. The structure and microstructure achieved in each step of the milling process are compared to the results of Cu-16at.%Al and Cu-30at.%Al obtained under the same conditions of reactive milling. At the final stage of milling, it was detected that the obtained intermetallic is not the equilibrium phase of the Cu-Al system.
Archivos asociados
Licencia
Identificadores
Colecciones
Articulos(CCT - PATAGONIA NORTE)
Articulos de CTRO.CIENTIFICO TECNOL.CONICET - PATAGONIA NORTE
Articulos de CTRO.CIENTIFICO TECNOL.CONICET - PATAGONIA NORTE
Articulos(IFIR)
Articulos de INST.DE FISICA DE ROSARIO (I)
Articulos de INST.DE FISICA DE ROSARIO (I)
Citación
Giordana, María Florencia; Muñoz Vásquez, Natalia; Garro González, M.; Esquivel, Marcelo Ricardo Oscar; Zelaya, Maria Eugenia; Study of the formation of Cu-24at.% Al by reactive milling; Elsevier; Procedia Materials Science; 9; 2-7-2015; 262-270
Compartir
Altmétricas