Repositorio Institucional
Repositorio Institucional
CONICET Digital
  • Inicio
  • EXPLORAR
    • AUTORES
    • DISCIPLINAS
    • COMUNIDADES
  • Estadísticas
  • Novedades
    • Noticias
    • Boletines
  • Ayuda
    • General
    • Datos de investigación
  • Acerca de
    • CONICET Digital
    • Equipo
    • Red Federal
  • Contacto
JavaScript is disabled for your browser. Some features of this site may not work without it.
  • INFORMACIÓN GENERAL
  • RESUMEN
  • ESTADISTICAS
 
Artículo

Forming Limit Curve Determination of a DP-780 Steel Sheet

Schwindt, Claudio DanielIcon ; Stout, Mike; Iurman, Lucio; Signorelli, Javier WalterIcon
Fecha de publicación: 04/2015
Editorial: ELSEVIER
Revista: PROCEDIA MATERIALS SCIENCE
ISSN: 2211-8128
Idioma: Inglés
Tipo de recurso: Artículo publicado

Resumen

In the present work, the forming limit curve (FLC) of a 1.1 mm thick DP-780 steel sheet is evaluated. The full FLC determination involved tensile tests of planar samples with different notch geometries ? providing data in the tension-compression range ? and Nakajima tests with a 40 mm diameter hemispherical punch and different notch geometries, covering the full loading zone of the forming limit diagram. The proposed Nakajima tool geometry reduces the standard test dimensions (ISO 12004-2) by 60%. Results show that the reduced diameter Nakajima test, in the particular case of Dual-Phase steels, overestimates limit strains when compared to the tensile test. This observed difference is explained in terms of the presence of a strain gradient through the sheet thickness imposed by the 40 mm diameter Nakajima punch, leading to the conclusion that this reduced sample type is not suitable for FLC determination when the DP-780 steel sheet is more than a millimeter thick.
Palabras clave: Dp Steel , Forming Limit Curve , Formability , Nakajima Test , Dic Technique
Ver el registro completo
 
Archivos asociados
Tamaño: 1.336Mb
Formato: PDF
.
Solicitar
Licencia
info:eu-repo/semantics/restrictedAccess Excepto donde se diga explícitamente, este item se publica bajo la siguiente descripción: Creative Commons Attribution-NonCommercial-ShareAlike 2.5 Unported (CC BY-NC-SA 2.5)
Identificadores
URI: http://hdl.handle.net/11336/40481
DOI: http://dx.doi.org/10.1016/j.mspro.2015.04.159
URL: https://www.sciencedirect.com/science/article/pii/S2211812815001601
Colecciones
Articulos(CCT - BAHIA BLANCA) [2166]
Articulos de CTRO.CIENTIFICO TECNOL.CONICET - BAHIA BLANCA
Citación
Schwindt, Claudio Daniel; Stout, Mike; Iurman, Lucio; Signorelli, Javier Walter; Forming Limit Curve Determination of a DP-780 Steel Sheet; ELSEVIER; PROCEDIA MATERIALS SCIENCE; 8; 4-2015; 978-985
Compartir
Altmétricas
 
Estadísticas
Visualizaciones: 72
Descargas: 0

Enviar por e-mail
Separar cada destinatario (hasta 5) con punto y coma.
  • Facebook
  • Twitter
  • Instagram
  • YouTube
  • Sound Cloud

Los contenidos del CONICET están licenciados bajo Creative Commons Reconocimiento 2.5 Argentina License

Ministerio
https://www.conicet.gov.ar/ - CONICET

Inicio

Explorar

  • Autores
  • Disciplinas
  • Comunidades

Estadísticas

Novedades

  • Noticias
  • Boletines

Ayuda

Acerca de

  • CONICET Digital
  • Equipo
  • Red Federal

Contacto

Godoy Cruz 2290 (C1425FQB) CABA – República Argentina – Tel: +5411 4899-5400 repositorio@conicet.gov.ar
TÉRMINOS Y CONDICIONES