Artículo
Thermal treatment of soils contaminated with gas oil: Influence of soil composition and treatment temperature
Fecha de publicación:
10/2002
Editorial:
Elsevier Science
Revista:
Journal of Hazardous Materials
ISSN:
0304-3894
Idioma:
Inglés
Tipo de recurso:
Artículo publicado
Clasificación temática:
Resumen
Samples of two soils containing different organic matter contents, neat or contaminated with gas oil (diesel fuel oil) at 2.5wt.% were heated from room temperature to different final temperatures (200-900°C). The experiments, performed in an anaerobic media, simulate conditions pertinent to ex situ thermal desorptive and thermal destructive treatments. The products generated during the heating were collected and light gases were analyzed by gas chromatography. The results indicate that the chemical composition of the soil is a key factor since it strongly influences the quantity and composition of the off-gases. According to the liquid and light gas yields, the gas oil does not affect appreciably the generation of pyrolysis products of the own soil constituents and the gas oil does not suffer significant chemical transformations even at high operating temperatures (e.g. 900°C). With surface areas of 16000cm2/g (Soil A) and 85000cm2/g (Soil B) based on the monolayer adsorbed model, 4 and 20%, respectively, of the original gas oil can be adsorbed. These values are in good agreement with experimental data. Even for high temperatures, the employed thermal treatment is capable to practically remove the gas oil from the soil bed without changing appreciably the original chemical composition of the contaminant.
Archivos asociados
Licencia
Identificadores
Colecciones
Articulos(PLAPIQUI)
Articulos de PLANTA PILOTO DE INGENIERIA QUIMICA (I)
Articulos de PLANTA PILOTO DE INGENIERIA QUIMICA (I)
Citación
Piña, Juliana; Merino, Jerónimo; Errazu, Alberto Felipe; Bucala, Veronica; Thermal treatment of soils contaminated with gas oil: Influence of soil composition and treatment temperature; Elsevier Science; Journal of Hazardous Materials; 94; 3; 10-2002; 273-290
Compartir
Altmétricas