Artículo

Use of a dynamic absorber in the case of a vibrating printed circuit board of complicated boundary shape

la Malfa, SalvadorIcon ; Laura, Patricio Adolfo AntonioIcon ; Rossit, Carlos AdolfoIcon ; Alvarez, O.
Fecha de publicación: 02/2000
Editorial: Academic Press Ltd-elsevier Science Ltd
Revista: Journal of Sound and Vibration
ISSN: 0022-460X
Idioma: Inglés
Tipo de recurso: Artículo publicado
Clasificación temática:

Resumen

An experimental investigation was carried out to examine the feasibility of using a dynamic absorber when a printed circuit board (PCB) of complicated boundary shape operates under resonance conditions. The dynamic response of the hexagonal plate was observed before placing the dynamic absorber and once the tuning operation was performed. As expected: the plate velocity amplitude experienced a highly noticeable decrement: from 4.697 to 0.7367mm/s.
Palabras clave: Vibrating Printed Circuit
 
Archivos asociados
Thumbnail
 
Tamaño: 127.0Kb
Formato: PDF
.
Licencia
info:eu-repo/semantics/openAccess Excepto donde se diga explícitamente, este item se publica bajo la siguiente descripción: Creative Commons Attribution-NonCommercial-ShareAlike 2.5 Unported (CC BY-NC-SA 2.5)
Identificadores
URI: http://hdl.handle.net/11336/35373
URL: https://www.sciencedirect.com/science/article/pii/S0022460X99925798
DOI: http://dx.doi.org/10.1006/jsvi.1999.2579
Colecciones
Articulos(CCT - BAHIA BLANCA)
Articulos de CTRO.CIENTIFICO TECNOL.CONICET - BAHIA BLANCA
Citación
la Malfa, Salvador; Laura, Patricio Adolfo Antonio; Rossit, Carlos Adolfo; Alvarez, O.; Use of a dynamic absorber in the case of a vibrating printed circuit board of complicated boundary shape; Academic Press Ltd-elsevier Science Ltd; Journal of Sound and Vibration; 230; 3; 2-2000; 721-724
Compartir
Altmétricas