Mostrar el registro sencillo del ítem
dc.contributor.author
Bruni, Yesica Lorena
dc.contributor.author
Garrido, Liliana Beatriz
dc.contributor.author
Aglietti, Esteban Fausto
dc.date.available
2018-01-15T17:01:33Z
dc.date.issued
2014-09
dc.identifier.citation
Aglietti, Esteban Fausto; Bruni, Yesica Lorena; Garrido, Liliana Beatriz; Properties of CaO-ZrO2 Based Composites; Elsevier; Procedia Materials Science; 8; 9-2014; 203-210
dc.identifier.issn
2211-8128
dc.identifier.uri
http://hdl.handle.net/11336/33253
dc.description.abstract
Composites of ZrO2-CA2 were sintered by the conventional technique at 1400° C from mixtures of m-ZrO2 with different amounts of high alumina cement containing CaO. The effect of the change in the composition on some properties such as: density, porosity, size and volume of pores, hardness and elasticity modulus of the composites was analyzed. Young's modulus was determined experimentally by the technique of excitation by impulse and hardness was evaluated by the Vickers method. The main phases identified by XRD were m-ZrO2, c-ZrO2 (CaO0.15 Zr0.85O1.85) and CA2 (CaAl4O7). An increase in the content of phase c-ZrO2 (CaO stabilized zirconia) was observed with increasing aluminous cement content. The apparent density decreased whereas porosity and pore volume increased by increasing the content of CaO. Hardness and elasticity modulus showed a clear dependence on composition and porosity of the composites.
dc.format
application/pdf
dc.language.iso
eng
dc.publisher
Elsevier
dc.rights
info:eu-repo/semantics/openAccess
dc.rights.uri
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
dc.subject
Zirconia
dc.subject
Aluminous Cement
dc.subject
Composites
dc.subject
Hardness
dc.subject
Young´S Modulus
dc.subject.classification
Recubrimientos y Películas
dc.subject.classification
Ingeniería de los Materiales
dc.subject.classification
INGENIERÍAS Y TECNOLOGÍAS
dc.title
Properties of CaO-ZrO2 Based Composites
dc.type
info:eu-repo/semantics/article
dc.type
info:ar-repo/semantics/artículo
dc.type
info:eu-repo/semantics/publishedVersion
dc.date.updated
2018-01-12T16:19:22Z
dc.journal.volume
8
dc.journal.pagination
203-210
dc.journal.pais
Países Bajos
dc.journal.ciudad
Amsterdam
dc.description.fil
Fil: Bruni, Yesica Lorena. Provincia de Buenos Aires. Gobernación. Comisión de Investigaciones Científicas. Centro de Tecnología de Recursos Minerales y Cerámica. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - la Plata. Centro de Tecnología de Recursos Minerales y Cerámica; Argentina. Universidad Nacional de La Plata. Facultad de Ciencias Exactas; Argentina
dc.description.fil
Fil: Garrido, Liliana Beatriz. Provincia de Buenos Aires. Gobernación. Comisión de Investigaciones Científicas. Centro de Tecnología de Recursos Minerales y Cerámica. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - la Plata. Centro de Tecnología de Recursos Minerales y Cerámica; Argentina
dc.description.fil
Fil: Aglietti, Esteban Fausto. Provincia de Buenos Aires. Gobernación. Comisión de Investigaciones Científicas. Centro de Tecnología de Recursos Minerales y Cerámica. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - la Plata. Centro de Tecnología de Recursos Minerales y Cerámica; Argentina. Universidad Nacional de La Plata. Facultad de Ciencias Exactas; Argentina
dc.journal.title
Procedia Materials Science
dc.relation.alternativeid
info:eu-repo/semantics/altIdentifier/doi/http://dx.doi.org/ 10.1016/j.mspro.2015.04.065
dc.relation.alternativeid
info:eu-repo/semantics/altIdentifier/url/http://www.sciencedirect.com/science/article/pii/S2211812815000668
Archivos asociados