Repositorio Institucional
Repositorio Institucional
CONICET Digital
  • Inicio
  • EXPLORAR
    • AUTORES
    • DISCIPLINAS
    • COMUNIDADES
  • Estadísticas
  • Novedades
    • Noticias
    • Boletines
  • Ayuda
    • General
    • Datos de investigación
  • Acerca de
    • CONICET Digital
    • Equipo
    • Red Federal
  • Contacto
JavaScript is disabled for your browser. Some features of this site may not work without it.
  • INFORMACIÓN GENERAL
  • RESUMEN
  • ESTADISTICAS
 
Artículo

Dense mullite zirconia composites obtained from the reaction sintering of milled stoichiometric alumina zircon mixtures by SPS

Rendtorff Birrer, Nicolás MaximilianoIcon ; Suarez, GustavoIcon ; Sakka, Yoshio; Aglietti, Esteban FaustoIcon
Fecha de publicación: 01/2014
Editorial: Elsevier
Revista: Ceramics International
ISSN: 0272-8842
Idioma: Inglés
Tipo de recurso: Artículo publicado
Clasificación temática:
Recubrimientos y Películas

Resumen

The main objective of this article is to obtain dense (porosity under 0.5%) polyphasic ceramics belonging to the Al2O3–SiO2–ZrO2 system by SPS sintering of high energy powders milled drily; the stoichiometric (54.45:45.54 zircon–alumina, weight basis) mixture was explored in this work. Particularly the principal sintering variables: sintering temperature and dwell time were investigated. The textural, structural and microstructural changes were evaluated together with the hardness and toughness of the obtained ceramics and their microstructure. The effect of the mechanical pre-treatment was carried out by X-ray diffraction and particle distribution evaluation. Due to the rapid heating process an incomplete reaction was achieved in several cases, as a consequence multiphasic ceramics with different alumina, mullite, zircon and zirconia contents were obtained. The mechanical pretreatment used resulted in a homogeneous dry mixture with a partial (≈20%) zircon dissociation, apparently enhanced by the alumina presence. This together with the posterior SPS processing permitted to obtain fully dense ceramic composites at a very low temperature (1300 °C) without the requirement of any additive. The reactions from alumina zircon mixtures to mullite zirconia occur 200 °C below conventional processing routes and at least 50 °C below the reported SPS based materials processed from un-milled mixtures. The microstructure and mechanical properties obtained were comparable to the ones obtained by other processing routes. Finally some interesting group correlations were found for the developed materials while the hardness is directly correlated with the density and the fracture toughness is correlated with the zirconia (m+t) content.
Palabras clave: B. Composites , D. Mullite , Zirconia , Reaction Sintering , Sps
Ver el registro completo
 
Archivos asociados
Thumbnail
 
Tamaño: 1.526Mb
Formato: PDF
.
Descargar
Licencia
info:eu-repo/semantics/openAccess Excepto donde se diga explícitamente, este item se publica bajo la siguiente descripción: Creative Commons Attribution-NonCommercial-ShareAlike 2.5 Unported (CC BY-NC-SA 2.5)
Identificadores
URI: http://hdl.handle.net/11336/32389
DOI: http://dx.doi.org/10.1016/j.ceramint.2013.08.119
URL: http://www.sciencedirect.com/science/article/pii/S027288421301078X
Colecciones
Articulos(CETMIC)
Articulos de CENTRO TECNOL.DE REC.MINERALES Y CERAMICA (I)
Citación
Aglietti, Esteban Fausto; Sakka, Yoshio; Suarez, Gustavo; Rendtorff Birrer, Nicolás Maximiliano; Dense mullite zirconia composites obtained from the reaction sintering of milled stoichiometric alumina zircon mixtures by SPS; Elsevier; Ceramics International; 40; 3; 1-2014; 4461-4470
Compartir
Altmétricas
 

Enviar por e-mail
Separar cada destinatario (hasta 5) con punto y coma.
  • Facebook
  • X Conicet Digital
  • Instagram
  • YouTube
  • Sound Cloud
  • LinkedIn

Los contenidos del CONICET están licenciados bajo Creative Commons Reconocimiento 2.5 Argentina License

https://www.conicet.gov.ar/ - CONICET

Inicio

Explorar

  • Autores
  • Disciplinas
  • Comunidades

Estadísticas

Novedades

  • Noticias
  • Boletines

Ayuda

Acerca de

  • CONICET Digital
  • Equipo
  • Red Federal

Contacto

Godoy Cruz 2290 (C1425FQB) CABA – República Argentina – Tel: +5411 4899-5400 repositorio@conicet.gov.ar
TÉRMINOS Y CONDICIONES