Mostrar el registro sencillo del ítem

dc.contributor.author
Costantino, María Alejandra
dc.contributor.author
Pettarin, Valeria
dc.contributor.author
Viana, Julio
dc.contributor.author
Pontes, Antonio
dc.contributor.author
Pouzada, Antonio
dc.contributor.author
Frontini, Patricia Maria
dc.date.available
2015-10-29T21:09:39Z
dc.date.issued
2013-05
dc.identifier.citation
Costantino, María Alejandra; Pettarin, Valeria; Viana, Julio; Pontes, Antonio; Pouzada, Antonio; et al.; Polypropylene/clay nanocomposites produced by Shear Controlled Orientation in Injection Moulding: deformation and fracture properties; Assoc Mechanical Engineers Technicians Slovenia; Strojniski Vestnik-journal Of Mechanical Engineering; 59; 11; 5-2013; 697-704
dc.identifier.issn
0039-2480
dc.identifier.uri
http://hdl.handle.net/11336/2580
dc.description.abstract
The effect of distinct morphologies induced by SCORIM in the mechanical and fracture performance of polypropylene (PP) and PP/nanoclay mouldings is examined in this work. The effect of high shear conditions applied during processing was assessed. Samples exhibited a range of fracture stability ranging from a modest non-linearity to a quasi-stable regime depending on material type and injection condition. Neat PP showed non-linear brittle behaviour while nanocomposites exhibited quasi-stable behaviour induced by the large deformation capability of the skin layer. Despite the fracture initiating at practically the same loading levels, the propagation energy varied with processing conditions and nanoclay content. The reduction of the core layer achieved by the SCORIM processing along with the differences between skin and core favoured by the presence of nanoclay are responsible of the toughening of SCORIM PP/nanoclay thick mouldings.
dc.format
application/pdf
dc.language.iso
eng
dc.publisher
Assoc Mechanical Engineers Technicians Slovenia
dc.rights
info:eu-repo/semantics/openAccess
dc.rights
Atribución-NoComercial-CompartirIgual 2.5 Argentina (CC BY-NC-SA 2.5 AR)
dc.rights.uri
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
dc.subject
Polypropyleno
dc.subject
Nanoarcilla
dc.subject
Scorim
dc.subject
Fractura
dc.subject.classification
Ingeniería de los Materiales
dc.subject.classification
Ingeniería de los Materiales
dc.subject.classification
INGENIERÍAS Y TECNOLOGÍAS
dc.subject.classification
Nano-materiales
dc.subject.classification
Nanotecnología
dc.subject.classification
INGENIERÍAS Y TECNOLOGÍAS
dc.title
Polypropylene/clay nanocomposites produced by Shear Controlled Orientation in Injection Moulding: deformation and fracture properties
dc.type
info:eu-repo/semantics/article
dc.type
info:ar-repo/semantics/artículo
dc.type
info:eu-repo/semantics/publishedVersion
dc.date.updated
2016-03-30 10:35:44.97925-03
dc.journal.volume
59
dc.journal.number
11
dc.journal.pagination
697-704
dc.journal.pais
Svn
dc.journal.ciudad
University of Ljubljana
dc.description.fil
Fil: Costantino, María Alejandra. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación en Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingenieria; Argentina
dc.description.fil
Fil: Pettarin, Valeria. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación en Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingenieria; Argentina
dc.description.fil
Fil: Viana, Julio. Universidade Do Minho; Portugal;
dc.description.fil
Fil: Pontes, Antonio. Universidade Do Minho; Portugal;
dc.description.fil
Fil: Pouzada, Antonio. Universidade Do Minho; Portugal;
dc.description.fil
Fil: Frontini, Patricia Maria. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación en Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingenieria; Argentina
dc.journal.title
Strojniski Vestnik-journal Of Mechanical Engineering
dc.relation.alternativeid
info:eu-repo/semantics/altIdentifier/doi/10.5545/sv-jme.2012.1002
dc.relation.alternativeid
info:eu-repo/semantics/altIdentifier/doi/http://dx.doi.org/10.5545/sv-jme.2012.1002
dc.relation.alternativeid
info:eu-repo/semantics/altIdentifier/url/http://www.sv-jme.eu/data/upload/2013/11/08_2013_1002_Constantino_03.pdf
dc.relation.alternativeid
info:eu-repo/semantics/altIdentifier/url/http://www.sv-jme.eu/archive/sv-jme-volume-2013/sv-jme-59-11-2013/


Archivos asociados

 

Comunidades y colecciones

Mostrar el registro sencillo del ítem