Evento
CO-PrOx in a milireactor 3d-printed by FDM
Tipo del evento:
Congreso
Nombre del evento:
11th World Congress of Chemical Engineering
Fecha del evento:
04/06/2023
Institución Organizadora:
Asociación Argentina de Ingenieros Químicos;
Título del Libro:
Wcce - 11Th World Congress of Chemical Engineering IACCHE; XXX Interamerican Congress of Engineering CAIQ2023; XI Argentinian Congress of Chemical Engineering CIBQ2023; II Iberoamerican Congress of Chemical Engineering "The Global Chemical Engineering Working For A Better Future World"
Editorial:
World Chemical Engineering Council
Idioma:
Inglés
Clasificación temática:
Resumen
An attractive option towards process intensification is the introduction of milireactors, with increased heat and mass transfer coefficients and enhanced control of the flux pattern [1]. The manufacture of these units requires a detailed and meticulous procedure. The use of 3D printing technologies provides the desired manufacture precision, with a high degree of flexibility in the design and at reduced costs, specially when FDM-type printers are employed. The objective of this work is to study the design, manufacture and operation of a milireactor 3Dprinted by FDM and profited towards the oxidation of CO in H2-rich environments (CO-PrOx).
Palabras clave:
CO-PROX
,
PREFERENTIAL OXIDATION
,
FDM
,
3D PRINTING
Archivos asociados
Licencia
Identificadores
Colecciones
Eventos(PLAPIQUI)
Eventos de PLANTA PILOTO DE INGENIERIA QUIMICA (I)
Eventos de PLANTA PILOTO DE INGENIERIA QUIMICA (I)
Citación
CO-PrOx in a milireactor 3d-printed by FDM; 11th World Congress of Chemical Engineering; Buenos Aires; Argentina; 2023; 181-181
Compartir