Optimization of ceramic proppant properties through an innovative coating approach

Abstract

In this current research endeavor, a comprehensive exploration into the properties of ceramic coatings has been undertaken, utilizing bauxite, talc, and kaolin clay. The primary focus lies in the meticulous analysis of the mechanical strength of ceramic proppants. The proppant raw material employed is kaolin clay, treated through a dry coating technique and subsequently sintered at 1300 ◦C. Evaluation of sample performance is based on the establishment of coating and substrate shrinkage. Shrinkage and density assessments are separately conducted for the coating mixtures and substrate. X-ray diffraction (XRD) is employed to discern the crystalline phases within the coatings, while structural characterization is facilitated through scanning electron microscopy (SEM) coupled with energy dispersive X-ray (EDX). Density and mechanical strength of proppants are meticulously investigated using picnometry and crush tests. The performances of the coated and uncoated samples were compared and investigated. Interestingly, the coated proppants demonstrate slightly higher density than their uncoated counterparts. Remarkably, the specimen featuring a coating composition of bauxite (72 wt%) + clay (25 wt%) + talc (3 wt%) yields optimal results for mechanical strength. The sole crystalline phase detected in the coating is mullite, with a minimum coating thickness of 10m.