Repositorio Institucional
Repositorio Institucional
CONICET Digital
  • Inicio
  • EXPLORAR
    • AUTORES
    • DISCIPLINAS
    • COMUNIDADES
  • Estadísticas
  • Novedades
    • Noticias
    • Boletines
  • Ayuda
    • General
    • Datos de investigación
  • Acerca de
    • CONICET Digital
    • Equipo
    • Red Federal
  • Contacto
JavaScript is disabled for your browser. Some features of this site may not work without it.
  • INFORMACIÓN GENERAL
  • RESUMEN
  • ESTADISTICAS
 
Artículo

Effect of topology on the adhesive forces between electrospun polymer fibers studied using a T-peel test

Montini Ballarin, FlorenciaIcon ; Blackledge, Todd A.; Capitos Davis, Nicole L.; Frontini, Patricia MariaIcon ; Abraham, Gustavo AbelIcon ; Wong, Shing Chung
Fecha de publicación: 08/03/2013
Editorial: John Wiley & Sons
Revista: Polymer Engineering and Science
ISSN: 0032-3888
Idioma: Inglés
Tipo de recurso: Artículo publicado
Clasificación temática:
Otras Ingeniería de los Materiales; Físico-Química, Ciencia de los Polímeros, Electroquímica

Resumen

Electrospinning provides an effective methodology to obtain high aspect ratio polymer fibers for biomimetic applications. In this article, we evaluate the effect of topology on adhesion between aligned fibers. Polycaprolactone is electrospun using two different setups: (i) a tip collector and (ii) a flat collector. The tip collector enables the fibers to self-align. When a fiber reaches the tip collector, the next fiber is repelled by the charge they carry, forcing the fibers to deposit in a parallel arrangement. The flat collector allows the fibers to deposit at random. The adhesion between the fiber mats is measured using a T-peel test. Adhesion strength (758.7 ± 211.7 kPa) changes marginally with the peeling rate and applied pressure on the membranes. Aligned fibers exhibit higher adhesion strength between the membranes in comparison to randomly oriented nonwovens (613.1 ± 79.9 kPa). The estimated Johnson–Kendall–Roberts contact energy (83.1 ± 32.5 mJ/m2) is consistent with the range of van der Waals adhesion forces. This work shows how the adhesion between two polymer membranes can be modulated by surface topology, based on a T-peel testing setup.
Palabras clave: Adhesion , Electrospinning , Nanofibers
Ver el registro completo
 
Archivos asociados
Thumbnail
 
Tamaño: 1010.Kb
Formato: PDF
.
Descargar
Licencia
info:eu-repo/semantics/openAccess Excepto donde se diga explícitamente, este item se publica bajo la siguiente descripción: Creative Commons Attribution-NonCommercial-ShareAlike 2.5 Unported (CC BY-NC-SA 2.5)
Identificadores
URI: http://hdl.handle.net/11336/2315
DOI: http://dx.doi.org/10.1002/pen.23474
URL: http://onlinelibrary.wiley.com/doi/10.1002/pen.23474/abstract
Colecciones
Articulos(CCT - MAR DEL PLATA)
Articulos de CTRO.CIENTIFICO TECNOL.CONICET - MAR DEL PLATA
Articulos(INTEMA)
Articulos de INST.DE INV.EN CIENCIA Y TECNOL.MATERIALES (I)
Citación
Montini Ballarin, Florencia; Blackledge, Todd A.; Capitos Davis, Nicole L.; Frontini, Patricia Maria; Abraham, Gustavo Abel; et al.; Effect of topology on the adhesive forces between electrospun polymer fibers studied using a T-peel test; John Wiley & Sons; Polymer Engineering and Science; 53; 10; 8-3-2013; 2219-2227
Compartir
Altmétricas
 

Enviar por e-mail
Separar cada destinatario (hasta 5) con punto y coma.
  • Facebook
  • X Conicet Digital
  • Instagram
  • YouTube
  • Sound Cloud
  • LinkedIn

Los contenidos del CONICET están licenciados bajo Creative Commons Reconocimiento 2.5 Argentina License

https://www.conicet.gov.ar/ - CONICET

Inicio

Explorar

  • Autores
  • Disciplinas
  • Comunidades

Estadísticas

Novedades

  • Noticias
  • Boletines

Ayuda

Acerca de

  • CONICET Digital
  • Equipo
  • Red Federal

Contacto

Godoy Cruz 2290 (C1425FQB) CABA – República Argentina – Tel: +5411 4899-5400 repositorio@conicet.gov.ar
TÉRMINOS Y CONDICIONES