Repositorio Institucional
Repositorio Institucional
CONICET Digital
  • Inicio
  • EXPLORAR
    • AUTORES
    • DISCIPLINAS
    • COMUNIDADES
  • Estadísticas
  • Novedades
    • Noticias
    • Boletines
  • Ayuda
    • General
    • Datos de investigación
  • Acerca de
    • CONICET Digital
    • Equipo
    • Red Federal
  • Contacto
JavaScript is disabled for your browser. Some features of this site may not work without it.
  • INFORMACIÓN GENERAL
  • RESUMEN
  • ESTADISTICAS
 
Artículo

Investigation of cast and annealed Ti25Nb10Zr alloy as material for orthopedic devices

Bolmaro, Raul EduardoIcon ; Parau, Anca C.; Pruna, Vasile; Surmeneva, Maria A.; Constantin, Lidia R.; Avalos, Martina CeciliaIcon ; Cotrut, Cosmin M.; Tutuianu, Raluca; Braic, Mariana; Cojocaru, Danut V.; Dan, Ioan; Croitoru, Sorin; Surmenev, Roman A.; Vladescu, Alina
Fecha de publicación: 07/2019
Editorial: Elsevier
Revista: Journal of Materials Research and Technology
ISSN: 2238-7854
Idioma: Inglés
Tipo de recurso: Artículo publicado
Clasificación temática:
Ingeniería de los Materiales

Resumen

In the present work, we report the preparation of a novel titanium-based alloy, namely Ti25Nb10Zr, by cold crucible levitation melting technique. The cast alloy consists of a complex microstructure with large Beta phase grains (54%, 50-150 μm) with a regularly connected net of Alpha′ (orthorhombic, 46%) phase running along boundaries and across the grains and keeping a regular misorientation with respect to the Beta phase. An intermeshed 51% Alpha and 49% Beta phases with lamellar microstructure were found by annealing. The electrochemical tests showed that both alloys were affected by the corrosion process. A good corrosion resistance in SBF at 37 °C was found for the cast form. The cast alloy is more resistant when immersed into solutions with pH2 and pH7, while the annealed one is resistant in pH5 solution. Surface potential of both alloys is negative, with the annealing process leading to a slight decrease of that property. Collectively, the biological results indicate a more favorable viability on cast form as compared to annealed one, suggesting that the cast alloy is promising for biomedical applications.
Palabras clave: CORROSION RESISTANCE , SBF , SURFACE POTENTIAL , VIABILITY
Ver el registro completo
 
Archivos asociados
Thumbnail
 
Tamaño: 6.250Mb
Formato: PDF
.
Descargar
Licencia
info:eu-repo/semantics/openAccess Excepto donde se diga explícitamente, este item se publica bajo la siguiente descripción: Atribución-NoComercial-SinDerivadas 2.5 Argentina (CC BY-NC-ND 2.5 AR)
Identificadores
URI: http://hdl.handle.net/11336/148051
DOI: http://dx.doi.org/10.1016/j.jmrt.2019.06.006
URL: https://www.sciencedirect.com/science/article/pii/S2238785419302170
Colecciones
Articulos(IFIR)
Articulos de INST.DE FISICA DE ROSARIO (I)
Citación
Bolmaro, Raul Eduardo; Parau, Anca C.; Pruna, Vasile; Surmeneva, Maria A.; Constantin, Lidia R.; et al.; Investigation of cast and annealed Ti25Nb10Zr alloy as material for orthopedic devices; Elsevier; Journal of Materials Research and Technology; 8; 4; 7-2019; 3399-3414
Compartir
Altmétricas
 

Enviar por e-mail
Separar cada destinatario (hasta 5) con punto y coma.
  • Facebook
  • X Conicet Digital
  • Instagram
  • YouTube
  • Sound Cloud
  • LinkedIn

Los contenidos del CONICET están licenciados bajo Creative Commons Reconocimiento 2.5 Argentina License

https://www.conicet.gov.ar/ - CONICET

Inicio

Explorar

  • Autores
  • Disciplinas
  • Comunidades

Estadísticas

Novedades

  • Noticias
  • Boletines

Ayuda

Acerca de

  • CONICET Digital
  • Equipo
  • Red Federal

Contacto

Godoy Cruz 2290 (C1425FQB) CABA – República Argentina – Tel: +5411 4899-5400 repositorio@conicet.gov.ar
TÉRMINOS Y CONDICIONES