Repositorio Institucional
Repositorio Institucional
CONICET Digital
  • Inicio
  • EXPLORAR
    • AUTORES
    • DISCIPLINAS
    • COMUNIDADES
  • Estadísticas
  • Novedades
    • Noticias
    • Boletines
  • Ayuda
    • General
    • Datos de investigación
  • Acerca de
    • CONICET Digital
    • Equipo
    • Red Federal
  • Contacto
JavaScript is disabled for your browser. Some features of this site may not work without it.
  • INFORMACIÓN GENERAL
  • RESUMEN
  • ESTADISTICAS
 
Artículo

Nanoquasicrystalline Al–Fe–Cr-based alloys with high strength at elevated temperature

Galano, Marina; Audebert, Fernando EnriqueIcon ; García Escorial, Asunción; Stone, Ian C.; Cantor, Brian
Fecha de publicación: 04/2010
Editorial: Elsevier Science
Revista: Journal of Alloys and Compounds
ISSN: 0925-8388
Idioma: Inglés
Tipo de recurso: Artículo publicado
Clasificación temática:
Ingeniería de los Materiales

Resumen

Nanoquasicrystalline Al–Fe–Cr-based alloys have a microstructure composed of nanoquasicrystalline particles embedded in an α-Al matrix, and have high strength at elevated temperatures. However, the metastability of the quasicrystalline phase can limit the use of these alloys at elevated temperatures. The microstructure, stability and mechanical properties at different temperatures on melt-spun nanoquasicrystalline Al–Fe–Cr-based alloys containing Ti, V, Nb or Ta have been studied and summarized in the present work. The structural characterisation was carried out by means of X-ray diffraction, hot-stage transmission electron microscopy and scanning-transmission electron microscopy. The addition of a fourth element to the Al93(Fe3Cr2)7 alloy increases the thermal stability, in particular in the case of the Nb and Ta containing alloys, leading to the delay of the phase transformation towards the melting of the alloys. The mechanical properties at elevated temperatures were studied by tensile tests at different test temperatures with different pre-heat treatments. All the alloys showed a very high strength up to 350 °C, more than five times the strength of the commercial Al alloys. These values and the enhanced thermal stability achieved in the quaternary nanoquasicrystalline Al–Fe–Cr-(Ti, V, Nb or Ta) alloys make these alloys very promising for industrial applications.
Palabras clave: Al Alloys , Rapid Solidification , Quasicrystals , Tem , Mechanical Properties
Ver el registro completo
 
Archivos asociados
Thumbnail
 
Tamaño: 754.7Kb
Formato: PDF
.
Descargar
Licencia
info:eu-repo/semantics/openAccess Excepto donde se diga explícitamente, este item se publica bajo la siguiente descripción: Atribución-NoComercial-SinDerivadas 2.5 Argentina (CC BY-NC-ND 2.5 AR)
Identificadores
URI: http://hdl.handle.net/11336/14794
URL: http://www.sciencedirect.com/science/article/pii/S0925838809022087
DOI: http://dx.doi.org/10.1016/j.jallcom.2009.10.208
Colecciones
Articulos(INTECIN)
Articulos de INST.D/TEC.Y CS.DE LA ING."HILARIO FERNANDEZ LONG"
Citación
Galano, Marina; Audebert, Fernando Enrique; García Escorial, Asunción; Stone, Ian C.; Cantor, Brian; Nanoquasicrystalline Al–Fe–Cr-based alloys with high strength at elevated temperature; Elsevier Science; Journal of Alloys and Compounds; 495; 2; 4-2010; 372-376
Compartir
Altmétricas
 
Estadísticas
Visualizaciones: 136
Descargas: 0

Enviar por e-mail
Separar cada destinatario (hasta 5) con punto y coma.
  • Facebook
  • Twitter
  • Instagram
  • YouTube
  • Sound Cloud

Los contenidos del CONICET están licenciados bajo Creative Commons Reconocimiento 2.5 Argentina License

Ministerio
https://www.conicet.gov.ar/ - CONICET

Inicio

Explorar

  • Autores
  • Disciplinas
  • Comunidades

Estadísticas

Novedades

  • Noticias
  • Boletines

Ayuda

Acerca de

  • CONICET Digital
  • Equipo
  • Red Federal

Contacto

Godoy Cruz 2290 (C1425FQB) CABA – República Argentina – Tel: +5411 4899-5400 repositorio@conicet.gov.ar
TÉRMINOS Y CONDICIONES