Artículo
Silver nanowires in poly(methyl methacrylate) as a conductive nanocomposite for microfabrication
Martínez, Eduardo David
; Lohr, Javier Hernán
; Sirena, Martin
; Sanchez, Rodolfo Daniel
; Pastoriza, Hernan
Fecha de publicación:
09/2016
Editorial:
Institute of Physics Publishing
Revista:
Flexible and Printed Electronics
e-ISSN:
2058-8585
Idioma:
Inglés
Tipo de recurso:
Artículo publicado
Clasificación temática:
Resumen
Anovel nanocomposite resist is presented based on AgNWs dispersed in poly(methyl methacrylate). It is shown that this nanocomposite resist displays sheet resistances below 10 O sq-1 for concentrations of AgNWs higher than 4%wt and can be used for a wide range of microfabrication techniques. The resist can act as a conductive ink that cures at room temperature, form thin films with low sheet resistances, and be used in fast replication methods derived from soft lithography. Furthermore, it can be applied for nano-scale fabrication via electron beam lithography (EBL) on different substrates, includingflexible and insulating materials, providing a straightforward method to avoid charging effects. This, being the first report about a nanocomposite resist based on AgNWs for EBL, describes a simple procedure to account for suspended nanowires, forming bridges, nanocantilevers and more complex nanostructures. A wide range of opportunities opens for the single-step fabrication of electronic components in the nano and micro scale.
Archivos asociados
Licencia
Identificadores
Colecciones
Articulos(CCT - PATAGONIA NORTE)
Articulos de CTRO.CIENTIFICO TECNOL.CONICET - PATAGONIA NORTE
Articulos de CTRO.CIENTIFICO TECNOL.CONICET - PATAGONIA NORTE
Citación
Martínez, Eduardo David; Lohr, Javier Hernán; Sirena, Martin; Sanchez, Rodolfo Daniel; Pastoriza, Hernan; Silver nanowires in poly(methyl methacrylate) as a conductive nanocomposite for microfabrication; Institute of Physics Publishing; Flexible and Printed Electronics; 1; 3; 9-2016; 1-10
Compartir
Altmétricas