Artículo
Influence of pile-up on nanoindentation measurements in Cu–2wt.%Be samples with precipitates
Fecha de publicación:
11/2019
Editorial:
Elsevier Science
Revista:
Transactions of Nonferrous Metals Society of China
ISSN:
1003-6326
e-ISSN:
2210-3384
Idioma:
Inglés
Tipo de recurso:
Artículo publicado
Clasificación temática:
Resumen
The influence of pile-up on the nanoindentation measurements in Cu–2wt.%Be samples with precipitates was carefully studied. The precipitates were formed by aging treatments for 1 h at different temperatures between 540 and 680 K. The load–depth curves were analyzed using the classical Oliver and Pharr method, and the obtained elastic modulus and hardness were compared with values estimated by other techniques. An important level of pile-up was found in samples with precipitates and differences in the load–depth curves were observed between the unaged and aged samples. A correction of the contact depth considering the pile-up proposed by Loubet was used for hardness estimation. For the determination of the elastic modulus, an approach based on the relation between the ratio of unloading work to indentation total work, with the ratio H/Er (H is the hardness; Er is the reduced modulus), was employed. A specific relation between both parameters was developed.
Archivos asociados
Licencia
Identificadores
Colecciones
Articulos(CIFICEN)
Articulos de CENTRO DE INV. EN FISICA E INGENIERIA DEL CENTRO DE LA PCIA. DE BS. AS.
Articulos de CENTRO DE INV. EN FISICA E INGENIERIA DEL CENTRO DE LA PCIA. DE BS. AS.
Citación
Montecinos Espinoza, Susana de Los Angeles; Tognana, Sebastian Alberto; Salgueiro, Walter Alberto; Influence of pile-up on nanoindentation measurements in Cu–2wt.%Be samples with precipitates; Elsevier Science; Transactions of Nonferrous Metals Society of China; 29; 11; 11-2019; 2340-2350
Compartir
Altmétricas