Repositorio Institucional
Repositorio Institucional
CONICET Digital
  • Inicio
  • EXPLORAR
    • AUTORES
    • DISCIPLINAS
    • COMUNIDADES
  • Estadísticas
  • Novedades
    • Noticias
    • Boletines
  • Ayuda
    • General
    • Datos de investigación
  • Acerca de
    • CONICET Digital
    • Equipo
    • Red Federal
  • Contacto
JavaScript is disabled for your browser. Some features of this site may not work without it.
  • INFORMACIÓN GENERAL
  • RESUMEN
  • ESTADISTICAS
 
Artículo

Nd60Fe30Al10 Glass Forming Magnetic Alloys: a Mechanical Spectroscopy Study at the 300- 560 K Temperature Range

Salva, Horacio RamonIcon ; Ghilarducci, Ada AlbertinaIcon ; Urreta, S. E.; Fabietti, Luis Maria RodolfoIcon ; Levingston, Jorge MatíasIcon
Fecha de publicación: 01/2012
Editorial: Trans Tech Publications
Revista: Diffusion And Defect Data, Solid State Data. Part B, Solid State Phenomena
ISSN: 1012-0394
1662-9779
Idioma: Inglés
Tipo de recurso: Artículo publicado
Clasificación temática:
Física de los Materiales Condensados

Resumen

The ferromagnetic amorphous phase in rapidly solidified Nd60Fe30Al10 glass forming alloys is investigated in melt spun ribbons (100 µm thick) and in chill cast cylinders (2 mm diameter). The amorphous resulting for these two different quenching rates were characterized by their room temperature hysteresis loops, magnetization and differential calorimetric measurements in the temperature range 300K-900K. The mechanical damping was explored in the 300-560 K temperature range, by measuring the internal friction and the shear modulus in a forced inverted pendulum operating in the frequency range 0.1-10Hz. Simultaneously, the electrical resistance of the samples was measured. The internal friction spectra of both, ribbons and a cylinder, exhibit a local maximum at about 500K, arising in a relaxation mechanism. After some thermal cycles the peak parameters stabilize reaching an apparent activation enthalpy of 1.5 eV and a limit relaxation time τ0 ≈ 0.4-2.5 . 10-17s. In both samples, the electrical resistance largely decreases during the first heating run to 560K and remains unchanged during subsequent thermal cycles. No changes in the elastic modulus or in the damping properties are detected at the Curie temperature of the alloys.
Palabras clave: Nd60fe30al10 , Internal Friction , Permanent Magnet
Ver el registro completo
 
Archivos asociados
Thumbnail
 
Tamaño: 707.0Kb
Formato: PDF
.
Descargar
Licencia
info:eu-repo/semantics/openAccess Excepto donde se diga explícitamente, este item se publica bajo la siguiente descripción: Creative Commons Attribution-NonCommercial-ShareAlike 2.5 Unported (CC BY-NC-SA 2.5)
Identificadores
URI: http://hdl.handle.net/11336/11269
URL: http://www.scientific.net/SSP.184.428
DOI: http://dx.doi.org/10.4028/www.scientific.net/SSP.184.428
Colecciones
Articulos(CCT - PATAGONIA NORTE)
Articulos de CTRO.CIENTIFICO TECNOL.CONICET - PATAGONIA NORTE
Citación
Salva, Horacio Ramon; Ghilarducci, Ada Albertina; Urreta, S. E.; Fabietti, Luis Maria Rodolfo; Levingston, Jorge Matías; Nd60Fe30Al10 Glass Forming Magnetic Alloys: a Mechanical Spectroscopy Study at the 300- 560 K Temperature Range; Trans Tech Publications; Diffusion And Defect Data, Solid State Data. Part B, Solid State Phenomena; 148; 1-2012; 428-433
Compartir
Altmétricas
 

Enviar por e-mail
Separar cada destinatario (hasta 5) con punto y coma.
  • Facebook
  • X Conicet Digital
  • Instagram
  • YouTube
  • Sound Cloud
  • LinkedIn

Los contenidos del CONICET están licenciados bajo Creative Commons Reconocimiento 2.5 Argentina License

https://www.conicet.gov.ar/ - CONICET

Inicio

Explorar

  • Autores
  • Disciplinas
  • Comunidades

Estadísticas

Novedades

  • Noticias
  • Boletines

Ayuda

Acerca de

  • CONICET Digital
  • Equipo
  • Red Federal

Contacto

Godoy Cruz 2290 (C1425FQB) CABA – República Argentina – Tel: +5411 4899-5400 repositorio@conicet.gov.ar
TÉRMINOS Y CONDICIONES