Artículo
Damping of the woodwind instrument reed material Arundo donax L
Weidenfeller, Bernd; Lambri, Osvaldo Agustin F.
; Bonifacich, Federico Guillermo
; Arlic, Uwe; Gargicevich, Damian
Fecha de publicación:
06/2018
Editorial:
Universidade Federal de São Carlos
Revista:
Materials Research
ISSN:
1516-1439
Idioma:
Inglés
Tipo de recurso:
Artículo publicado
Clasificación temática:
Resumen
The viscoelastic properties (E', G', tanΦ, δ) of Arundo donax (AD) and a polypropylene-beech fiber composite (PPC) were measured from RT to 580K for various frequencies and strains. E' of AD varies between 5250-6250MPa depending on ageing at RT while E'(RT)=2250MPa of PPC is signifcantly lower. E' of the AD is higher than E' of PPC in the whole investigated temperature range with the exception of AD after a heat treatment up to 575K. Damping spectra exhibit peaks around 340K (Q=234kJ/mol) and 415K for the PPC related to relaxations in the crystalline part of polypropylene and the relaxation at melting temperature. For AD damping peaks were found at 350K (Q=320kJ/mol) related to the glass-rubber transition of lignin, at 420K due to a reorganization in the amorphous phase of lignin, at 480K related to micro-Brownian motions in the non-crystalline region of cell-wall polymers and reduction of the crystallinity of cellulose, and at 570K due to the polymeric compounds of wood and/or a decomposition of lignin. The course of E' and tanΦ of AD and PPC is comparable from 20-200Hz, whereas tanΦ of AD is lower than tanΦ of PPC while E' of AD is higher than E' of PPC.
Palabras clave:
ACTIVATION ENERGY
,
ARUNDO DONAX
,
DAMPING.
,
INTERNAL FRICTION
,
POLYMER COMPOSITES
Archivos asociados
Licencia
Identificadores
Colecciones
Articulos(CCT - ROSARIO)
Articulos de CTRO.CIENTIFICO TECNOL.CONICET - ROSARIO
Articulos de CTRO.CIENTIFICO TECNOL.CONICET - ROSARIO
Citación
Weidenfeller, Bernd; Lambri, Osvaldo Agustin F.; Bonifacich, Federico Guillermo; Arlic, Uwe; Gargicevich, Damian; Damping of the woodwind instrument reed material Arundo donax L; Universidade Federal de São Carlos; Materials Research; 21; Supl. 2; 6-2018; 1-6
Compartir
Altmétricas