Mostrar el registro sencillo del ítem
dc.contributor.author
Fernandez, M. L.
dc.contributor.author
Lacalle, Ainhoa
dc.contributor.author
Bilbao, Javier
dc.contributor.author
Arandes, J. M.
dc.contributor.author
de la Puente, Gabriela
dc.contributor.author
Sedran, Ulises Anselmo
dc.date.available
2018-04-05T20:10:00Z
dc.date.issued
2002-05
dc.identifier.citation
Fernandez, M. L.; Lacalle, Ainhoa; Bilbao, Javier; Arandes, J. M.; de la Puente, Gabriela; et al.; Recycling Hydrocarbon Cuts into FCC Units; American Chemical Society; Energy & Fuels (print); 16; 3; 5-2002; 615-621
dc.identifier.issn
0887-0624
dc.identifier.uri
http://hdl.handle.net/11336/40988
dc.description.abstract
A bench scale reactor, which is a simulator of FCC riser units, has been used to study the upgrading of low value hydrocarbon cuts (a heavy coker naphtha and a visbreaker naphtha) by catalytic cracking of a mixture of these cuts (20 wt %) with the conventional feedstock (vacuum gas oil). The results of yield and composition of gasoline have been compared with those obtained by catalytic cracking of vacuum gas oil and with those obtained following other upgrading strategies for these cuts, such as their direct catalytic cracking or their blending with the gasoline stream of the FCCU. In general terms, increases in gasoline yields oppose to losses of its quality. The results show that the cracking of the heavy paraffins contained in these naphthas is inhibited by the adsorption of heavy olefins present in these cuts. Coke yields are not higher than the ones obtained when cracking standard VGO, and then the impact on units' heat balances would be negligible.
dc.format
application/pdf
dc.language.iso
eng
dc.publisher
American Chemical Society
dc.rights
info:eu-repo/semantics/openAccess
dc.rights.uri
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
dc.subject
Fcc
dc.subject
Coker
dc.subject
Visbreaker
dc.subject
Naphtha
dc.subject.classification
Otras Ingeniería Química
dc.subject.classification
Ingeniería Química
dc.subject.classification
INGENIERÍAS Y TECNOLOGÍAS
dc.title
Recycling Hydrocarbon Cuts into FCC Units
dc.type
info:eu-repo/semantics/article
dc.type
info:ar-repo/semantics/artículo
dc.type
info:eu-repo/semantics/publishedVersion
dc.date.updated
2018-03-16T15:42:59Z
dc.journal.volume
16
dc.journal.number
3
dc.journal.pagination
615-621
dc.journal.pais
Estados Unidos
dc.journal.ciudad
Washington
dc.description.fil
Fil: Fernandez, M. L.. Universidad del País Vasco; España
dc.description.fil
Fil: Lacalle, Ainhoa. Universidad del País Vasco; España
dc.description.fil
Fil: Bilbao, Javier. Universidad del País Vasco; España
dc.description.fil
Fil: Arandes, J. M.. Universidad del País Vasco; España
dc.description.fil
Fil: de la Puente, Gabriela. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Instituto de Investigaciones en Catálisis y Petroquímica ; Argentina
dc.description.fil
Fil: Sedran, Ulises Anselmo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Instituto de Investigaciones en Catálisis y Petroquímica ; Argentina
dc.journal.title
Energy & Fuels (print)
dc.relation.alternativeid
info:eu-repo/semantics/altIdentifier/doi/http://dx.doi.org/10.1021/ef010184i
Archivos asociados